Search results for query: *

Forum search Google search

  1. J

    Cruiser Head

    Yes please
  2. J

    Old Man Emu Shackle Length Question for install, need some help

    Thanks for responding. I was trying to find the difference between the 2 versions of GS1/2 that I keep coming across.
  3. J

    Old Man Emu Shackle Length Question for install, need some help

    I know this is an old thread but hoping to get a response- Is it better to get the triangular OMEGS1 and OMEGS2? Trying to understand the difference (pros/cons) versus the 2 pin versions that I have with the OME kit I just got
  4. J

    How to Desmog an FJ60

    Dizzy Vent port question: My current connection goes to a T that connects the Dizzy Vent to the PVC and PVC Inlet. Based on what I see in the desmog instructions you connect the Dizzy Vent to the VCV that has a vacuum to via air cleaner (I haven't connected the T on the VCV to connect x and...
  5. J

    Replace Carb with OEM Carb (Jim C rebuild) but seems like the throttle is open.

    So I narrowed it down to the bracket that attaches to the carb. Not sure if it is bent or what. I tried to put a washer to raise it a bit which helped but it does not close completely when pulled by the return spring... (have to manually push it a bit) Thanks for the input! I think I am...
  6. J

    Replace Carb with OEM Carb (Jim C rebuild) but seems like the throttle is open.

    I 100% agree it IS my issue... just getting frustrated. Thanks for the videos I will be watching them tonight. I did notice what you were pointing out in the pic last night but could not get it mounted without them touching as it is putting some pressure on that pin (not sure what you call it).
  7. J

    Replace Carb with OEM Carb (Jim C rebuild) but seems like the throttle is open.

    Giving up for now.... I adjusted the idle speed screw and it made zero difference. Quick question- is the screw suppose to touch anything if you go clockwise? I just see it compress a spring and when I go counterclockwise it just comes out to the end thread and decompresses the spring. I...
  8. J

    Replace Carb with OEM Carb (Jim C rebuild) but seems like the throttle is open.

    Can't even see down the throat of the carb. Yes new base plate and nuts are snug. I am going to try get a pen light in there to see if I can see the blades
  9. J

    Replace Carb with OEM Carb (Jim C rebuild) but seems like the throttle is open.

    Need some help. I decided to replace the Weber that was on my 86 FJ60 with a Jim C rebuild. Luckily I had all the linkage and choke cable still. I made sure to double check the desmog doc to make sure there is nothing missing before putting the OEM on. Unfortunately, what once was a...
  10. J

    How to Desmog an FJ60

    Thanks!... I had a Weber on my vehicle and just went back to stock. The PO had a tube sticking out of the valve cover. Is that where this tube would connect to? { NEVERMIND - I just saw the other pics}
  11. J

    How to Desmog an FJ60

    Desmog question regarding the Air Cleaner: I had the Jim C 2F Cap and Plug kit and put the caps on the Air Cleaner that fit however, there was a third tube (angled tube on the right) that I do not see referenced in the kit or Desmog doc. Any idea what this connects to or does it get capped as...
  12. J

    74 FJ40 accelerator linkage

    I have a dumb question. I am installing an OEM carb and was wondering how you install the accelerator rod to the carb. I see some of the linkages have pins but I am unsure how to attach it to the linkage like you have pictured. Any tips would be greatly appreciated.
  13. J

    How to Desmog an FJ60

  14. J

    How to Desmog an FJ60

    Beware when performing the removal of parts: If you remove the metal spaghetti piping be sure to put the bolt back into the front of the block and tighten. I thought he bolt was simply for attaching the piping, until I came back to a small puddle of coolant.
  15. J

    How to Desmog an FJ60

    Do you have to cut the air pipe per the doc or can you just leave it? "The metal pipe off the pump can be removed, then there's a decision to make about how to deal with the rubber hose and the metal pipe that connects to the cat. The choice is as follows (from JimC):o The proper fix is to...
  16. J

    Thinking about going back to OEM carb

    I am stumped. I don't see a green/pink or red wire in that are at all. The only thing I have are these 3 loose wires from a loom. Blue wire grounded to the fender and then a green wire that is not used and a black with yellow stripe that is spliced to a red wire that connects to the weber...
  17. J

    Thinking about going back to OEM carb

    Can anyone show me a pic of where to connect this green plug (circled in pic) to? Mine looks to be missing (cut) in my engine bay
  18. J

    How to Desmog an FJ60

    Question about desmogging: After following the pdf for desmog; is it expected that the headlamp washer loses functionality?
  19. J

    EGR Desmog Question

    Did you ever get the PCV to EGR dilemma sorted? If so, can you share any pics on what you ended up with? Thanks
  20. J

    Requesting help: Anyone know what this wire or tube was

    Thanks for the info
Back
Top Bottom