Search results for query: *

Forum search Google search

  1. 86trooper

    BJ74 k082 axle Spline count

    Can anybody verify a spline count for the differential side of the front and rear axles on a bj74 or ko82 axle? I am trying to order some lockers without having to pull my rear end apart to count. I believe them to be 30 spline front and rear on the diffs?
  2. 86trooper

    Toyota 13bt valve seals

    I will give it a shot, thanks guys
  3. 86trooper

    Toyota 13bt valve seals

    I’ve never heard of them, looks like they are in the UAE?
  4. 86trooper

    86 trooper/ bj74 mashup

    And finished up a rear bumper I had started on over a year ago.. then knocked out a front bumper with winch mount. Should be back from powdercoat next week
  5. 86trooper

    86 trooper/ bj74 mashup

    Interior is mostly buttoned up for the time being, need to add an egt and boost gauge. Bought a Jeep ome steering stabilizer and fabbed up a mount for it, as well as switched to a fabricated pitman arm that I scabbed together from 3/4” steel. Added a nomad valve body and fabbed up a quick 3”...
  6. 86trooper

    86 trooper/ bj74 mashup

    Still plugin away at the land trooper, have done a short 70 mile test drive to uncover some issues with my turbo rebuild and valve seals being the wrong ones.
  7. 86trooper

    Toyota 13bt valve seals

    Can anybody confirm that 3b valve seals are the same as 13bt seals? I badly need a full set but cannot confirm this.. nor can I track down a set available in the states. I see CruiserParts sells 3b seals pn: 90913-02051. But I always seem to waiting quite some time for parts from them.
  8. 86trooper

    Bj74 a440f nomad valve body

    Awesome, thank you!
  9. 86trooper

    Bj74 a440f nomad valve body

    Is valley hybrids the same as cruiser brothers? Because I have a call in to them and am waiting on their parts department to call me.
  10. 86trooper

    86 trooper/ bj74 mashup

    Rear end is all resealed and painted, new brake components and gaskets all around. Pinion seal was very leaky so I addressed that as well.. then got the rear end installed and build some new brake lines and a vent line to mount to the Isuzu rollover vent.
  11. 86trooper

    86 trooper/ bj74 mashup

    Got my tires mounted this week and hopefully be installing those this weekend. Working on getting the front axle finished up. Radiator mounts are fabbed, added fan switch and a petcock as well as electric fan mounts.. also got the head back on my 13bt and resealed and cleaned the front timing...
  12. 86trooper

    Bj74 a440f nomad valve body

    Does anybody know where a guy can order a a440f Nomad valve body in the states? I tried getting in touch with west coast cruisers but their phone doesn’t seem to be working.
  13. 86trooper

    86 trooper/ bj74 mashup

    After a 6 week wait I got my wheel hardware in to finish bolting the wheels together, just need to silicone them and get the tires mounted up. Picked up a spare 35 as well.
  14. 86trooper

    86 trooper/ bj74 mashup

    Thanks dude I appreciate it, I’ve learned the hard way a lot haha.
  15. 86trooper

    86 trooper/ bj74 mashup

    Rear end welded out and as disassembled as it’s going to get, cut off and cleaned up the old brackets and the housing. That third member gasket was insane tough to remove! Ready for paint and reassembly. Was pleasantly surprised to see the gears in good shape.
  16. 86trooper

    86 trooper/ bj74 mashup

    Driveshafts are in, double cardigan front and rear. Did a nose cone swap on my starter to a 12v setup. Now to tackle the alternator swap I am trying to do, and start in on the axles while I wait on other parts.
  17. 86trooper

    86 trooper/ bj74 mashup

    Started to dig into the motor while I waited on other parts, got the head taken off for inspection, all the valve seals were in bad shape so I made a little quick spring compressor from a c clamp to change those out and clean up the head. Bottom end looks to be in good shape, had to reorder a...
  18. 86trooper

    86 trooper/ bj74 mashup

    Steering box mount is redone and clocked correctly now, I build a steering shaft but didn’t get a picture of it yet, steering arms are single pass welded and need a cap pass yet, front and rear shock mounts are done. Ended up changing the front shock mount to a design with more clearance.
  19. 86trooper

    86 trooper/ bj74 mashup

    Also finished up all the frame welding and chassis welding, got it all prepped and painted, fender Wells under coated as well. Drivers and passenger flop pans were getting pretty surface rusted so I went over the entire area. Also cut out and fabbed up and changed to a beefier rear crossmember...
  20. 86trooper

    86 trooper/ bj74 mashup

    Ended up changing the driver side panel for the trans tunnel, didn’t like the way it was without a curled upper edge, and finished welding up the tunnel completely. Kinda looks funky but whatever, it’ll do.
Back
Top Bottom