Search results for query: *

Forum search Google search

  1. Honeybadger80

    Wanted On the hunt for passenger rear window louver wenatchee wa

    You know what ill just buy it now im feeling good today can you send me a pm and get this rolling
  2. Honeybadger80

    Wanted On the hunt for passenger rear window louver wenatchee wa

    Thanks for responding so quick to my delayed responses. Its been crazy busy around here. Ill have to wait on the purchase there is a few more things i should be spending 100 bucks on before i replace a piece of plastic. If you dont mind ill message you in the near future when im ready
  3. Honeybadger80

    Wanted On the hunt for passenger rear window louver wenatchee wa

    How much do you want for one shipped to 98802. Im looking for one with all mounting standoffs still attached and the holes not busted through like the one i have.
  4. Honeybadger80

    Wanted On the hunt for passenger rear window louver wenatchee wa

    Actually i have found everything so far thanks for asking! Im looking for a good deal on a steering colum cover. The plastic behind the steering wheel if you happen to know to get e of those ?
  5. Honeybadger80

    Wanted Fj80 Steering column plastic. Washington

    Crap my bad its a 1994. Thanks i really should proof my post.
  6. Honeybadger80

    Wanted  Fj80 Steering column plastic. Washington

    Looking for the steering column plastic top and bottom. Previus owner broke all the plastic stand offs and they are missing so i got nothing to even glue back together. Sick and tired of hearing the scrapeing sound everytime i turn the wheel.
  7. Honeybadger80

    Wanted  Washington state. Amber corner light

    Im hoping you guys can help me find a driver side marker light In amber/orange. Its the last cosmetic piece i need/want to complete my exteior. I have the passenger side so i dont really want to buy two clear depo lights and have one amber left over
  8. Honeybadger80

    Low idle after rebuild

    Good to know ive never expericed valve float so i didnt know. I did not verify with the CEL normally i just hear a change in the sound and assume im good to go ill double check it. So describing my issue right now is harder than i thought. Ive done plenty of motor work and am a confident...
  9. Honeybadger80

    Low idle after rebuild

    I know the answer to this one is to go by the fsm but any tips advice experiences for tps set up i pushed on the linkage at the sensor that connects it and it stalled. I never messed with its position durring the removal and install and it along with everything has factory paint marks still...
  10. Honeybadger80

    Low idle after rebuild

    Also with the original issue my intake hose to the MAF was cracked found that out real quick when it split completely in half when i took it off . So its glued and rtv until i get a new one
  11. Honeybadger80

    Low idle after rebuild

    Yeah its a defeating feeling i have but obviously not giving up it doesnt sound anything catastrophic so i know it can be solved. What are people timing to on these some people i have read are saying 7° but fsm says 3° btdc and thats what i did. Timing light was set to 0°advanced like its manual...
  12. Honeybadger80

    Low idle after rebuild

    Also if anyone is in the wenatchee WA area that wants to take a look i got cash and cold drinks for your services !
  13. Honeybadger80

    Low idle after rebuild

    Okay got it running and idleing smooth. Im assuming i was off a tooth. Anyways at idle it runs and sounds great but as i bring up the rpm it seems to loose power around 2500 rpm or so and when i let off it just hangs out there in that rpm range where it happend untill i shut it down even if i...
  14. Honeybadger80

    Low idle after rebuild

    Havent gone to check this mornimg but soon ill be out there i think last night the distributor was pushed pretty far down to get close to 3° . If its off a tooth is it just a 50 50 chance of roating it the right way back a tooth ? Is there a good way to see if i take the cap off that im colse or...
  15. Honeybadger80

    Seat belt webbing replacment

    I got my belts back a little while ago from saftey restore and they did a fantastic job of course. I did have to send one whole belt back to them cause i could not for the life of me get it to extend only retract after they rewebbed it. They took it back and fixed it free of charge and were...
  16. Honeybadger80

    Low idle after rebuild

    Ill check both both of those once i got some coffee in me and report back. Also ill dig through my FSM and see if i can find anything on the TPS but i think i only had printed about 400 pages of engine rebuild goodies ill see if thats in there with what i got
  17. Honeybadger80

    Low idle after rebuild

    I just got done with my rebuild of a 1fz on my 94 and on start up its sounds and runs great. After about 15 seconds it starts to idle really low and stalls out, and in the process the check engine light comes on before it dies. It fires right back up with no CEL and does the same thing . I can...
  18. Honeybadger80

    Wanted  WA looking for front driver fender and flare

    Im on the hunt for a 1994 fender and flare. Not picky about paint or color i hoping someone local has one. Let me know what your price is also if you have one or the other let me know
  19. Honeybadger80

    Chip/dent in piston what to do?

    Ha i love the the help. Everyones opinion means alot i can convince myself to be on both sides. To rebuild or not to rebuild thats is the question. Has anyone had good experience with the lcperformance master rebuild kit if i do choose to go that route. Seems to be everything is forged and fancy...
  20. Honeybadger80

    Chip/dent in piston what to do?

    Okay soo... my local machine shop will hone / clean for less than 100 so thats worth it to me instead of buying a hone ill use just the one time. Id love to try it but maybe ill start on a small engine or something. As for putting this back together of course id do it right take my time when i...
Back
Top Bottom