Brand new pair of halogen headlights and wiring harness. Bought for CruiserCorps a couple of years ago but didn’t use them. $60 plus shipping. I believe these also fit 60 series
Pair of chrome bumperettes in very good condition. The outward facing sides are very clear with a few imperfect areas on the back sides. Bought these a few years ago but repainted mine instead. $75 for the pair plus shipping.
Steering wheel that fits a1972 FJ40, fair condition has some cracks at the inside where the spokes meet the center hub. I bought this as a backup but don’t need it. It does have the metal piece the horn sits in but it doesn’t not have the center horn emblem. Does include a new spring for the...
I’m trying to put in replacement front lap belts (there are none now). I found the bolt hole for the drivers side male end but don’t see where the female side bolt location is? Does anyone have a photo of how this setup is supposed to look? Same question for passenger front side. Thanks for any...
Finally figured this out yesterday. I unplugged the turn signal switch under the dash and the brake lights came on but the day indicators did not so it had to be the turn signal. I had replaced the turn signal assembly last year since the old one didn’t flash on one side. I plugged in the old...
Hi, when I push the brake pedal both turn signal dash lights come on but the brake lights do not. The tail lights work and both rear turn signal flashers work and the lights flash when the hazards are pulled on. I’ve tested the bulbs and they are ok. The wiring from the firewall back is all new...
Hi, I bought a vacuum test kit and am trying to find a location to connect. This a 10/71 fj40 with 155f original engine. Is the location circled in red ok to use? This hose leads to the brake booster. Is the location circled in blue viable? This one is on top of intake manifold and the hose...
Thanks for responding, I’m going to get it out on the road for a good while. The plugs were changed about 2.5 years ago along with cap rotor and wires and I changed air cleaner a couple of months ago. I have not adjusted timing or cleaned pcv hose so I will do that. Thanks again.
Thank you, I’m going to try some of the other suggestions but I know what it could be. Did you rebuild your engine or just replace the head gasket, mill it, etc,?
Thank you for this info. I’m going to try just driving it for a while first and see if that changes anything. I’m also going to try the bubble test in the radiator but I agree that the head gasket is looking less likely (fortunately). The black on the plugs was on all of them and I’m getting a...
It’s coming out after I first crank it but I haven’t driven it to try and dry it out. I let it run for about 15 minutes today and it was still coming out, more when I hit the gas. If it’s from sitting too long would that also cause the exhaust smell? Th ask for the response.