Search results for query: *

Forum search Google search

  1. S

    Parting Out 1988 FJ62 in Alberta, Canada

    How much would you want for pretty much the whole dash assembly? I'm thinking of a swap into a 60.
  2. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

    Good call, I'll have to put a bit more elbow grease into it, or take it to the machine shop. As for the bearing I read some forum posts and they said the Koyo 62012RS or the NSK 6201DU worked, I ordered the former. More info here: Seized distributor bearing left me stranded =( -...
  3. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

    Yep, here’s the link to the specific P/N https://www.mcmaster.com/nav/enter.asp?partnum=93235A345
  4. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

    Post-Op - everything seems great, hole size is identical, and she threads in great to the carb. I'll have to wait until I get my engine back together to see how it actually runs, but that may be a bit as I'm now in the midst of a move. On another note, I was taking my dizzy apart and following...
  5. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

    Good call - I had checked but didn't think 30mm was long enough, luckily it barely is. Ordered two, I'll see how well drilling the hole out works and update later.
  6. S

    Seized Distributor Shaft - How to Replace Shaft Bearing?

    Hey all, I've been rebuilding my engine, and while the parts were at the machine shop I started work on the carb and dizzy, rebuilding the carb, and following the 'poor-man's recurve' linked here. After I got the dizzy apart, I noticed the shaft bearing didn't spin smoothly, and was audibly...
  7. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

    Alright, I think I'm going to order some of these in M6 x 30mm, which should barely fit the carb, they'll have 3.2mm bores, as compared to the 2.5mm I need, but I'm trying to find some with a 2mm bore that I can carefully ream out with a 2.5mm drill bit. This'll be a bit of a bodge, but I guess...
  8. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

    Uh oh 😬 I've been looking for similar screws, and have foun a few different places to source vented machine screws, granted they won't be identical, but it'll be better than nothing. One vendor has a nearly identical bolt available, however with a 2mm vent diameter, compared to the OEM 2.5mm...
  9. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

    21834 Ah you caught me! I've certainly learned my lesson about SST's. While I was looking for answers I came across a post recommending a bolt from a Corolla, and while it was nearly identical, it didn't account for the flange spacer, and was too short. I'll probably browse some online carb...
  10. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

  11. S

    FJ60 Vacuum Passage Bolt For Aisan Carb - Where to Source?

    Hey all, I recently took on the job of rebuilding the carb on my FJ60, and got all the way to the vacuum passage bolt only to realize, it was just a tiny bit stuck, and eventually I managed to strip it to the point that a screw extractor was necessary, which completely mangled the bolt. Now I'm...
  12. S

    Crankshaft Machining/Replacement

    Hey All, I recently got an FJ60 off of marketplace that was known to have engine knock, and having rebuilt some VW 1600s in the past, I figured I could do a good enough job fixing the knock. I popped off the oil pan last night, and lo and behold the rod bearing on cylinder #3 had turned into...
Back
Top Bottom