Search results for query: *

  • Users: cb97angler
  • Content: Threads
  • Order by date

Forum search Google search

  1. cb97angler

    6/74 Clutch completely destroyed

    Out at Anza Borrego 2 weeks ago, coming down a steep hill, I pushed in clutch towards bottom of hill and at the run out, my clutch pedal let go, clutxh tried to engage but ended up absolutely grenading. I was probably do 15mph and it was in 1st gear with Orion tcase in 4wd low. So the torque...
  2. cb97angler

    Alternator Voltage

    I roasted a battery with very little usage over a year and a half of use and it sat on a trickle charger while not in use. I figured I'd look for issue. Turns out I was getting inconsistent current from 13 to 15.8 volts at alternator and battery. I figured VR, replaced and same issue. I...
  3. cb97angler

    Orion Transfer

    Hi ya'll, I am considering doing the swap to a Orion Transfer case. Problem is I don't know when how I will cut out time to rip apart the case and swap out the orion parts. Does anyone have a recommendation for a transmission shop here is SoCal that they would trust with this. I can get an...
  4. cb97angler

    Soft brake pedal while crawling

    rig is a 74 fj40 with f engine and swapped to 4 wheel discs, had lots of problems getting brakes set up but once I went to an fj80 MC they are perfect.....except, when I go to 4wheel low and am crawling I loose pedal pressure. I can't imagine it's the booster but my thinking may be wrong. My...
  5. cb97angler

    Soft Pedal offroad Hard pedal at road speeds.

    I went Out on some trails this weekend in borrego springs and thought I finally had my brakes dialed in, but found out not the case. I have a 74 fj40, went to 4 wheel discs after an issue that enabled me to get both front and rears from man-a-fre for a great price. I had issues getting good...
  6. cb97angler

    Bench Bleeding

    So I am bench bleeding the master cylinder on my 74fj40, just bought a brand new aisin. I have the fittings on, clear tubes running into a container with fluid covering the ends instead of back into the resevoirs, I get endless bubbles so there's a problem, but also, should the fluid be flowing...
  7. cb97angler

    Endless bubbles bench bleeding

    What the :censor: is going on. I am trying to bench bleed my master cylinder and I am getting endless bubbles. I first started with the old one on the 40 and was bench bleeding it there since it was run completely dry. I was getting endless bubbles there, I got a new one, doing an actual...
  8. cb97angler

    Hub Housing Question

    Hey guys, so my situation is this, I have a74 fj40 that the previous owner put the man-a-fre front disc conversion on about 7 years ago, it was the rotor that mounts behind the hub, well the caliper mount broke and I got a whoel new set up with the floating rotor. Here's the problem, I have 2...
  9. cb97angler

    Wanted  75 or newer fj40 hub

    need the hub that the bearings sit in on hte axle, not the locking hub. for some reason guy who had rig before me has an early fj hub on there so the disc conversion kit I am installing, the rotor doesn't fit over the hub so I need one. hit me with a pm or email hugh@goldenappraisals.org
  10. cb97angler

    Wanted  Hub 75 or later fj40 hub

    I need the actual hub that the bearings sit in, not the locking hub, I was doing a disc conversion and the guy who had rig before me for some reason put a early fj40 hub on the passenger side so the rotor doesn't fit over it. Hit me with a PM or email me at hugh@goldenappraisals.org thanks
  11. cb97angler

    Wanted  Warn hubs 6 spline

    I am looking for 1 or 2 warn premium manual locking hubs for a 74 fj40, so it's a 6 spline birfield. I'll take any 6 spline birfields out there as well as a precaution until I can afford some longfield's
  12. cb97angler

    RElease fork broke

    Can there be any other damage other than to the release fork. I replace my slave since it blew out and of course installed a spring since it didn't have ine before, and the pedal was mushy, well i've seen the post on tht adjustment so forget that, anyways I took spring off to get pressure and...
  13. cb97angler

    Clutch slave mount

    CAN SOMEONE SEND ME A PHOTO OF WHAT THE CLUTCH SLAVE MOUNT LOOKS LIKE AND WHERE IT MOUNTO ON THE BLOCK OR BELL HOUSING?? i JUST ORDER ONE, SINCE MY WAS RUNNING WIHTOUT ONE, WHICH i HAD NO IDEA. tHANKS AHEAD OF TIME FOR THE HELP
  14. cb97angler

    clutch release fork problem

    how much play should be in the clutch release fork when i pull teh slave off to replace. mine moves around quite a bit, should it be fairly solid or have alot of play??
  15. cb97angler

    clutch slave/release fork issue

    I have a 74 fj40 and blew out the slave, so i just ordered a new one, had a hard time getting the hydralic hose off, but once i did, i got it re installed, bled the system and tried the clutch and it was super stiff so i pressed a little harder an it blew the slave again. I got under and...
  16. cb97angler

    Weber Carb For Sale

    Weber 32/36 for fj40. full Man-a-fre kit for sale call if interested 760-390-4260 or just hit this thread
  17. cb97angler

    cool starting issue

    Hello all i am new here. i have a 74 fj40 that starts great when it's warm out or is jumped by my 06 tacoma. keep in mind here that cooler temps involve 40 to 50 degrees here in san diego. no problems all summer and starts great after running for a short time, but wheni try to start it in the...
Back
Top Bottom