Search results for query: *

Forum search Google search

  1. P

    GX 460 Blitz rock sliders

    it looks like victory initially released a skid that did not offer adequate protection. The second version seems better but still requiring some user modifications. Check out the GX460 OFF-ROAD YouTube video showing both.
  2. P

    GX 460 Blitz rock sliders

    I can agree with a few points on the GX460. However I have to disagree these points can lead to a conclusion that these are made in China. That doesn’t make sense to me. It takes longer than six weeks to ship something from China right now! It might take six months with the clogged Ports. I...
  3. P

    GX 460 Blitz rock sliders

    Victory said they would work on a fix for reprotecting the KDSS line protection with their slider install but never got back to me. I guess they are too busy releasing new products to take care of the fatal flaw in their already released products. Very frustrating.
  4. P

    Idiot Youtuber takes a stock GX down Broken Arrow

    Jake, I recently lifted my ‘17 and did the airbag washer trick in the back. I did a writeup here that gives you measurements and such. It is as per the video above on the ‘17 with air suspension. It only takes 5 minutes to add more washers or take them away to dial it in.
  5. P

    How to fool TPMS when running a low PSI spare or No Spare

    Another person here posted the idea from their 4Runner. The thread with pics can be found HERE. The cut is almost the same on the GX. Post #27.
  6. P

    How to fool TPMS when running a low PSI spare or No Spare

    For what it's worth, I had the same problem but managed to fit the same tire in the stock location fully aired up by cutting the metal tab back 3/8" at the back of the tire well on the factory hitch using a cutoff wheel. It gave us just enough extra clearance to fully air up and like you, we...
  7. P

    GX 460 Blitz rock sliders

    One other tip, I did strike two different lines on each side of each step. One on the outside near the wheel well, and when it curves into the steps, I taped a second line on a slightly different angle to meet the step at a good point, slightly angled up.
  8. P

    GX 460 Blitz rock sliders

    They are cut stock steps. I pinned them down on a table, masked off about 1/4" below what they specify, and then used a thin cutoff wheel on an angle grinder to cut. Then I reinstalled and used a flap wheel sanding disk on the angle grinder to slowly shape up to the specified line. That method...
  9. P

    Builds Car Camping Edition Build

    Before I put in my 6112s and washers under the rear sensors I marked my headlight top cutoff in my driveway on the back wall from a marked line on the floor. After the install, i adjusted the headlights down a bit to meet that line. There are two recessed screwdriver holes on the headlight to...
  10. P

    How much do you like/enjoy/use the tailgate?

    Great lighting mod. Can you provide any details on how you wired it? Power source, fusing, switching, wire gauge? I‘ve done a power panel with 12 volt, Anderson, auSB, etc. on the other side of the car but never brought power to the passenger (US) side.
  11. P

    How much do you like/enjoy/use the tailgate?

    I looked at a bunch of materials for the Kaon insert, many available at the same source, and richlite won out. Like mentioned, it’s easy to fully clean so good for bear country, it’s easy on knives, heat resistant and importantly, relatively lightweight with the 1/4” option. The 1/4” richlite is...
  12. P

    Builds Car Camping Edition Build

    I love your setup. I'm new here as well and just building up my first GX and glad to have you here with us. I also have a rare luxury+drivers support model as well so I'll look out for reports of the quirks, features, and specific mods you do.
  13. P

    GX460 Roof Antenna Shark Fin Cover Delete

    GFC has a delete kit for the ‘10-‘14 4Runner that has a rounded nose that may work for you. The one I presented here is for 2016+. Perhaps this will fit your ‘14.
  14. P

    How much do you like/enjoy/use the tailgate?

    It was made by Cuttingboard.com. It’s just over $100. I used 1/4” richlite and specified bullnose edge with juice groove. I have 3/8” rubber pads underneath to space it up. You’ll have to cut off the back corners to clear the pivot bolts but that took 3 minutes with an angle grinder and polished...
  15. P

    How much do you like/enjoy/use the tailgate?

    I hated the barn door until I installed a table on it a few weeks back. I picked up a bad brisket smoking habit while living in Texas during grad school. Now I can bring one with me resting in a cooler to serve at tailgates and picnics - made easier by the richlite insert on our Kaon table with...
  16. P

    GX 460 Blitz rock sliders

    A quick update, after another email to Victory 4x4 about our frustration in discovering that the factory KDSS skid not fitting after installing the Blitz sliders, they sent me an email this morning saying "we are going to look into a skid upgrade for the blitz sliders. We don't have a timeline...
  17. P

    GX460 Roof Antenna Shark Fin Cover Delete

    When researching the fin cover replacement, I did see lots of Toyota folks wanting to replace their antenna assembly location, or at least their Satellite antenna, to improve reception. Universally it was reported that the proprietary connectors made it difficult to swap for a non-Toyota antenna...
  18. P

    GX460 Roof Antenna Shark Fin Cover Delete

    I'm not sure if this answers your question, but the outer and inner fin cover were replaced by the low profile GFC 3D printed cover plate leaving the antenna circuit board in place on the roof. Internal and external gaskets keep the circuit board and the roof waterproof (in theory). I was told...
  19. P

    GX460 Roof Antenna Shark Fin Cover Delete

    I searched a lot of threads to try to figure out a good way to create a low profile option for the roof shark fin antenna cover for our 2017 GX460 luxury. I couldn't find an antenna delete thread that clearly showed it working for our GX without removal through the headliner or home brewing a...
  20. P

    GX 460 Blitz rock sliders

    I heard back from Victory 4x4 on the GX460 Blitz sliders. Their response to my inquiry about the fact that the factory KDSS skid plate cannot be installed with their slider in place leaving the KDSS lines exposed on the frame rail (see photo above) was that "I ran through the install video and...
Back
Top Bottom