It just started making the noise, about 8 or so miles into a trip. It SOUNDS like it’s coming from the manifold area, but accurately pin-pointing a location by sound alone is difficult.
Right now the sound drops to almost unnoticeable at engine idle speeds.
And it’s been a very long time since I’ve done that type of work on a FJ40. Like, late 1980’s long time.
But I do remember the “ticking” sound when there is a exhaust gasket leak. But how much work is it to take the manifolds off? I don’t have the original carb and air filter installed, I’ve...
A previous owner removed any dome light if one existed. And the fuse will give out after about 5 minutes even if not turned all the way to the brightest setting, but is turned greater than 50%. Below that point and it lasts for 1/2 hour with no problem. Haven’t driven it extensively yet, have a...
Some previous owner cut notches where the tabs are, but not deep enough for the tabs to completely miss. I drove the Cruiser today with the brightness adjusted about 1/2 of travel and didn't blow a fuse. But I know if I turned it all the way the fuse would last only about 5 minutes max. I...
They claim to be (and are) much brighter than the original bulbs in the panel, but they are still incandescent and not LED. I took my Cruiser out for a test drive Friday and after a couple of times around the block I went to a store about 10 miles round trip away. When I came out and started the...
I bought it from Cruiser Corps and there are a couple of numbers;
Brand Code 4048
OEM Code T309
If I remember correctly I ended up searching for 'Pewter' spray paint on the website. I don't think its an exact match, but its close and looked a lot closer after I let it dry for a day. Kind of...
For everyone else, I got a rebuilt odometer from JVZii, He was fast and friendly and helpful. I hope I DON'T need his help for this Cruiser odometer again but I would not hesitate to ask again if I get another with the same problem:
Odometer at 57000.0...
End of the repaint and odometer repair questions, at least for now. Thanks to all for advice. I ended up getting the Cruiser Corp spray paint. It's delivery went from unknown to tomorrow in space of 1 day. Looks pretty good to me.
Well, because the can of spray paint from Cool Cruisers went from 6 day delivery date to unknown, you are not tool late. I called a few shops that powder coat but none of them have the color code I found in a post above, and getting it is extended and expensive, because they need to buy a...
I work for a company that makes custom assembly machines and we send our machine guards out to be powder coated frequently. Most of the guards are at least 16 gauge which is probably a little heavier than the stamped faceplate but we’ve never had problems with them distorting parts. But I don’t...
Someone else right above your post mentioned powder coating, and I don’t know why I don’t think of that option. I work in a plant that regularly sends parts out for powder coating, and I frequently see how much better it looks than my spray painting. But for a number of projects I don’t think...
Well, it may be related to the jeep: A Brief History of the Toyota Land Cruiser FJ40 / BJ40 + J40 Series - https://silodrome.com/toyota-land-cruiser-fj40-bj40-history/
I first heard this same basic story back in 1975 when I bought my first FJ40, a soft-top 1967 with a 3 on the tree column...
I've got the whole unit down to individual parts and there is some light rust on the surface of the metal front face of the Gauge/Speedo cover that means now would be the time to sand/repaint it. My FJ40 is a 1976 and I would describe the color as a muted silver right now. I could just paint it...
This is what they look like. I don't see a lot of wear but I'm not an expert at what it should look like:
And is this something I should put grease onto as well or am I likely to be flinging little globules everywhere if I do grease them?
Does this look ok to you?
You put the link in your reply to me, I thought I should have probably replied here instead:
https://forum.ih8mud.com/threads/76-fj40-odometer-e-clip-lost-during-attempt-to-fix-stuck-numbers.1286901/
I am interested and what do I need to do to order one?
Here's a few pics I took during disassembly yesterday:
The 54709 milage is what the Cruiser had when I bought it, and I bought it knowing the odometer didn't work. The Speedometer does, and is pretty accurate when I compared it to a GPS speed app while I was driving to check the speed. The...