Search results for query: *

Forum search Google search

  1. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    Fixed the problem. I got a new NSS and cleaned out the engine side plug. I managed to get them to mate properly and it solved all the problems instantly. Just wanted to say thanks to everyone who helped me out to resolve this issue and I can drive my beloved 80 again.
  2. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    Yes the damage looks to be just the socket it self because the wires behind it apeare to be fine. I fairly certain that the damage is only in this area and nothing concerning the ECU is damaged. Im going to try and clean out the socket and get a new NSS to plug in to see if it fixes anything. If...
  3. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    All of that brown/ black stuff is burnt and melted plastic. And in the engine side connector there is a pin that is stuck in the middle port. I can try and clean out the female end to include pulling that connector and try plugging in a new NSS but I cant say if it would work or not.
  4. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    So today I decided to replace the broken Knock Sensor and check out the NSS to try and figure out what might be causing me problems. The knock sensor didnt do much to help (to no suprise) however I found out the I may have a HUGE problem. The connector that connects the NSS to the wiring harness...
  5. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    Sounds like a plan. Ill look at the NSS barrel connectors to see if there is corrosion (today I just checked if they were plugged in all the way and they were). It would make sense since the PHH leaked a ton when it broke. Also, are there 2 models of NSS? I see pictures of It with a rectangular...
  6. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    Thank you for the insight, ill check it out in the morning when I have more light.
  7. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    Okay so. I looked at where I was working when I replaced the PHH and I didn't find any lose connections or unplugged plugs. However I realized that my reverse lights are always on as well as the reverse indicator on the gauge cluster (reguardless of what gear im on). I have a theory that maybe...
  8. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    Hmmm I agree. Ill have to check it when get it back from the dealer. Ill see what I can find.
  9. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    So I also thought it would be the trans shift solenoid. However most everything I read about other people's shift problems and they all looked to be getting worse over time. My problem was a sudden onset because when I drove it less than a week prior everything was as it should.
  10. MeEnghuneer

    Reverse Lights Stay on, PRND2L Always Indicating In Revers, Trans Not Shifting Properly

    So I recently changed my spark plug wires on my 1993 FZJ as well as doing the dreaded PHH replacement yesterday. When I was done replacing the PHH I went on a test drive to make sure I had no leaks and it was good. However I noticed that when I got on the gas the engine would rev up slowly and...
Back
Top Bottom