Has anyone had luck fixing a broken overflow nipple on an early 80 (pic attached)? If so, what'd you use?
If I go with a new radiator, what are thoughts on a custom brass radiator? A local shop quoted me ~$750 for one made to mount like OEM. Otherwise, I can get a CSF for less, but I've heard...
Would like your thoughts on whether I should replace a tension pulley (the power steering / air pump tensioning pulley)?
I've pulled everything for a water pump replacement (yes, it is a huge PITA). Inspecting the pulley, it spins fine, but when I hold the center and pull/push from side to...
Just took this off my 92. Can anyone confirm it’s aftermarket, not Toyota OEM? I don’t see any markings, just the label. Toyota should have my replacement in later today.
What 16x8 wheels with a -22 Offset do you have? 17" might work also. Pics and info on where you got them are appreciated. Looking to upgrade my stock wheels. Thanks.
I'd like to see what wheels people are running with -22 offset. Looking to upgrade my stock wheels but not sure to what yet. Pics and leads on where you bought them are appreciated. I prefer 16x8, but 17" might work too. Thanks
After doing a coolant flush and doing some light wheeling this weekend, I noticed a little bit of coolant splattered above the thermostat. Looks like it’s coming out the part with the black cap and two small hoses. The FSM doesn’t identify This part, but it has two slits on the cap and it looks...
Just want to leave a tip for anyone else who runs into a leak issue after installing a new thermostat on their 3F-E 80 Series. It's not clear from the FSM, but you drop the thermostat into the lower housing and then the lower/upper housing gasket over the thermostat flanges. I had a noob moment...
Are the pics here normal after a knuckle rebuild? I've seen some discussion about whether it's necessary to fill the plug hole 2/3 or 3/4 as long as the birf bell housing is packed.
Background: A local shop regeared my 92 a couple months ago. While they were at it, I had them install lockers...
I would appreciate info from anyone who's fit a Warn winch to an Ironman 80 Series Deluxe Bull Bar. I'd prefer one that bolts on without (too much) modification. I'm not too clear on which are directly compatible. Reached out to Ironman a few weeks ago, but no response. Thanks.
Hoping someone’s come across this issue.
New to me 80. At startup, idles at 1600 RPMs. P & N is 1600. Any gear idle is 1000 RPMs.
Another issue is that at startup, when I press the brake to put it in D, the RPMs drop to 900 and surge up to 1200 repeatedly. This stops when I go into D, then it...
Recently had to buy and program a new keyless entry key fob for my 1992 Land Cruiser alarm system. I had a hard time finding info on the system, so I’m sharing the manual here in case anyone needs it. Instructions on page 8 are straight forward. Looks like these systems were available on LCs...
Going through baseline projects on my 92 LC. I noticed a layer of grease around the birfs/knuckles. Would appreciate hearing from those who’ve had this issue. Are the wipers or inner seal shot? Should the knuckles be rebuilt?