Search results for query: *

Forum search Google search

  1. 1995cruiser

    A sad day for me. LX may be done.

    Wow I was having a good time reading this poor guys post WOW that just came out of nowhere. He was getting his mad on.
  2. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

    jcardona1 and all thank you for helping me. You nailed that one. I have attached pictures. The Fix . After reading all suggestions from the group, I started out by welding a 1/2" thick Plate on top of the existing bump stop pad. This helped me loose a 1/2" of my problem. When the suspension is...
  3. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

    Im working on that right now but I found lots of front end out of wack. Thanks ill post where I'm at after some words with her.
  4. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

    Landtank is that really the fix?
  5. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

  6. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

    So I noticed the bump stops lands only on the edge of the welded box bases not centered. I welded a piece of 1/2" plate 1 inch longer over the entire pad to make the bump land within the base all the way. The half inch plate I added leaves me with only about a 1/2'" to deal with clearance fully...
  7. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

    This is about 1.5" from bottom out. and almost touching.
  8. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

    almost hanging from the straps.
  9. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

    Sorry for the large pictures I assume they will be. I tried to shrink them but failed.
  10. 1995cruiser

    Pitman arm tie rod end hitting crossover linkage on full compression.

    Hello I have been working on this modified 1995 landcruiser and have literally hit another road block on my steering. During or before full front suspension compression, Pitman arm tie rod are contacting hitting the crossover linkage. I have found some posts on another forum with similar same...
  11. 1995cruiser

    Dead 4.5L

    Landlocked93 and Jonheld thanks for the feedback regarding. I definitely know a little more about this truck from this session. I would love to have full vol 1-2 in an electronic copy. So its to late to say but my truck is running really good. I found the crank sensor plug was shotty on the...
  12. 1995cruiser

    Dead 4.5L

    Yea that's what I'm getting at. I have covered a lot of stuff trying to hunt this down. When I purchased this thing I new it had some issues that he owner wasn't telling me about. The day they brought it to me on a trailer they all looked at each other like here it goes and when it started they...
  13. 1995cruiser

    Dead 4.5L

    I can dig some up. Do you know if this 95 specific year has a fuel cut off safety tip over switch or anything related to fuel.
  14. 1995cruiser

    Dead 4.5L

    I disassembled the truck electrical all the way from ECU to engine compartment inspected all harnessing and used electro duct to make new harnesses. The vehicle has lots of sharp Sheetmetal all the way along the harnessing. Added 6 grounds from block to frame and body. eliminated all of the rear...
  15. 1995cruiser

    Dead 4.5L

    Got it. The 94s opining relay confused me it wan an cube relay. This is nice because this same relay is used for other things on this truckI figured it out when I seen the wire size and colors where the same as the wires back at the C pillar.
  16. 1995cruiser

    Dead 4.5L

    Ok here is mine.So you are telling me the 90987-02004 that is the same relay as EFI in the upper box so the bottom relay on the right.
  17. 1995cruiser

    Dead 4.5L

    Hello Jon thanks for the reply always appreciated. The location you speak of that is where I found no voltage on the red/green and white/black while turning over. I still dont know if my fuel pump is good. Could this be externally powered at this location from just the tank side connector for...
  18. 1995cruiser

    Dead 4.5L

    Ok still stuck but I have some other info. I checked the spark on all 6 plugs and I thought that the spark would be a little brighter then what I was seeing, but I was wrong. Now that I verified spark to all 6 plugs and I know I'm getting air, I shot some starting fluid into the intake and it...
  19. 1995cruiser

    Dead 4.5L

    I was thinking the same thing.
  20. 1995cruiser

    Dead 4.5L

    I removed the ECU and disconnected the battery's. I unplugged the ECU completely because I was working last month chasing down a engine cutout during lots of body roll left to right. They had me go over some stuff over by B pillar an fuel pump connector and a few other things. Some techs from...
Back
Top Bottom