I need a lower right rear spring plate, the part that goes under the spring with the lower shock mount. From a 1990 or newer 70 series. This has the shock mount on the back side of the spring plate, not the front side of the spring plate. I am installing a rear sway bar and the forward...
Any thoughts on the best way to remove this fitting from the block? The upper ACSD water hose connects to it. I have the oil cooler cover without the lower water hose fitting (thanks @OGBeno).
I have a 24 volt upright Aisin winch (Warn 8274 type) and will be installing it in a 12v truck. Anyone have a 12v setup and need a 24v motor and be interested in a trade?
These seats are from a 70/73 series truck. They are in excellent shape with a couple of small rips (see pictures). Drivers side (LHD) seat is missing right side rail. $500 for the pair. Pickup or shipping through Fastenal.
Driver’s seat
I have all the factory brackets to mount an A/C compressor to the 2H/12HT motors. My guess is that the compressor is not good, but it has the fittings for a/c lines. The idle pulley bolt is broken and the idle pulley itself will probably need to be replaced. Everything you need to mount the...
During a water pump change on my 1HDT, I accidentally set the camshaft and injector pump marks to TDC, not BDC without initially realizing this. As I was cleaning things up to begin the reassembly, I noticed that the TDC timing mark on the crankshaft did not match the timing mark on the timing...
Does anyone have the FSM that covers the hydraulic A442F? The valve body is different the the electric VB. Having the transmission rebuilt and the shop needs a schematic/diagram of the check balls/springs.
Thank you!
Chris
I have my JDM fully hydraulic A442F at the transmission shop for a rebuild. The A442F FSM I provided only shows the valve body layout of the electronic version of the transmission. Does anybody have a FSM for the hydraulic version or a PDF of the hydro valve body?
Thank you,
Chris
Hello all,
Transmission shop has rebuilt my fully hydraulic A442F (From 1981 JDM HDJ81) but we are not able to find the correct valve body gaskets. I’m looking for part numbers:
35433-60020
35434-60020
I need these to complete the rebuild. Does anyone have these or know
of an alternative...
I have a set of 60 series 3rd row seats for sale. You will need to source the hardware to mount them to the floor. One seat has large rip on the back. $500 obo, buyer pays shipping.