Search results for query: *

Forum search Google search

  1. B

    Spacing between frame rails on a Gen 3 4 runner

    Exactly like the thread reads - Yes
  2. B

    Similarities between 90's and 3rd Gen 4Runner

    I have a stone chip that is controlled (Windshield repair) but in discussion with the Canadian Prado group, there were a few JDM junk yards mentioned which I have forgotten their exact name. Let me see if I can find that thread
  3. B

    Similarities between 90's and 3rd Gen 4Runner

    Why not just buy from one of the wreckers in BC ?
  4. B

    VZJ95W muffler

    Wondering if anyone else has to go down this rabbit hole yet The Muffler - It seems both the (97) Prado (gas) uses the same muffler as the (97) 4runner gas The EPC tells me 17420-62210 This PN crosses to the 97'runner as well. Toyota Canada wants $770 for an OEM while Walker sells a...
  5. B

    Builds '97 VZJ95W to Canada - Ontario - Misc Blathering on

    So eventually that was traced to the plug wires - Did the transmission service (3l new fluid by pan drain), MAF clean, injector clen (LiquiMoly) and Vacuum check - Finally a plug wire swap cleaned it all up. I do have a small muffler hole - I think for that I will start a new thread to...
  6. B

    Builds '97 VZJ95W to Canada - Ontario - Misc Blathering on

    It is amazing how fast time gets away from you. I drained and refilled the transmission pan in '20 and '21 but it looks like I missed summer '22 and - Yep - You guessed it it was down a quart - Well this being a Metric truck it was down a liter :) . So I did the pan drain and refilled with...
  7. B

    Builds '97 VZJ95W to Canada - Ontario - Misc Blathering on

    Update This April passed 3 years on the road and now at 181,000km (75,000 km by me) There is a muffler hole that is acceptable now - But soon will need a muffler swap out. It looks upon first glance the muffler itself is the same as a 4 runner, but the piping is different - Humming and...
  8. B

    90 Series Prado, where the heck do I get parts lads!

    Look back in the thread - There is the 90series EPC (Electronic parts catalogue) linked Then dump those part numbers into Google or Rock Auto for options. So far I have been quite lucky with that route.
  9. B

    90 Series Prado, where the heck do I get parts lads!

    3rd gen runner yes. The first thing I did to the truck (Spring 2020) was the infamous lower Ball Joints - I did not get those off the market - Toyota OEM only - About a year later I did the inner tie rod on (my) driver's side. It was an exact match to the 3rd gen runner. There is an EPC for...
  10. B

    90 Series Prado, where the heck do I get parts lads!

    There is a global shortage of containers and that is compounded by lower-than-typical shipping levels. What was a $2400 certified seaworthy container in Dec 2019 is now a $8000 line item. _Then_ finding a space on a boat is even harder. _Then_ the lack of resources to unload the container and...
  11. B

    Builds '97 VZJ95W to Canada - Ontario - Misc Blathering on

    Wow - Almost a year since I posted last. Rolled over 162,000 end of July (100,000 miles) - Took the truck off the road for a couple of weeks as I attend to bland service tasks with the Galloper on the road. The rear parking brake looks like it lost a spring, causing the grinding noise that I...
  12. B

    90 Series Prado, where the heck do I get parts lads!

    Good link, but same result for our poster... 46504 PLATE SUB-ASSY, PARKING BRAKE, LH 46504-60050 1 $516.95
  13. B

    90 Series Prado, where the heck do I get parts lads!

    I do not know any of them by name, but there is a collection of JDM/RHD auto wreckers in the Vancouver BC and Victoria BC area - they may have some
  14. B

    Loose Auto gear shift lever in Prado 90 3.4 V6

    "Timmy the tool man" on youtube has a detailed video on re-bushing the Gen 3 auto shifter - It would not be too different to the 90 series Prado
  15. B

    Land Cruiser Prado 90 RZ Import & Refresh (and maybe build...)

    3rd Gen 4runner hitches work. FOr bolts i just bought the 4Runner equivalents - Sure it is 4x the price of "joe's bolt shop" but it just works without the muss and fuss of matching threads and bolt gauge 70'ft lbs it your target I gooped it up good with Antisieze as I live in the salt. If...
  16. B

    LC 90 Clock and Inclinometer

    Holding the Mode button will turn on the display light for the tri gauge Clock - Is it the Analog one? That moves in one minute increments. be sure the plug is snug - I seem to recall there were separate lines for both clock and light.
  17. B

    Builds '97 VZJ95W to Canada - Ontario - Misc Blathering on

    Just a note on the Raybestose pads THEY ARE CRAP Moan and groan all the time - I should have took Scotties advise and gone with the Akibono and I think I will but once I get the Galloper on the road - One last thing - The licence plate lights.
  18. B

    Builds Canada - 1999 KZJ90 Land Cruiser "build"

    Dodio - I'm in Kitchener and my Mom lives on E23'rd in the Hammer - Drop me your number by PM and we can see if we can hook up ( I have one of the other Canadian builds in the 90's section here)
  19. B

    Builds '97 VZJ95W to Canada - Ontario - Misc Blathering on

    So the squeal pins started to hit on a 1590km jaunt up to Manitoulin island - Got around to changing the rear rotors Saturday The odd thing was they were so difficult to remove - All of the other 90 series youtube videos (mostly Aussies) gingerly removed the old rotors and slid on the new ones...
  20. B

    Builds '97 VZJ95W to Canada - Ontario - Misc Blathering on

    So of course to mount an awning you need a roof rack. A few YouTubers I have watched have galvanized Superstrut used for the rack. It looks well suited with good mounting arrangements with all of the holes and excellent strength. The weight is high though, mind you that could be offset by the...
Back
Top Bottom