I don't have a pattern established, but till 90 Km/hour it seems natural and a nice drive, anywhere past the 115 to 130(max speed) Km/h it feels like John Deere has gone mad, just too ... One thing worth mentioning; I had to get the front passenger tire, right side for Canada, re-balanced and...
I just checked the harmonic balancer this aft, in all honesty the extent in which I can check the "beast" is well it's there. As to budge it good luck. I suppose, I have to take it out before I can thoroughly check it. No work was done on the engine ever, it starts runs and averages 10.6...
Definitely a good point. Something I suspected, since there is an oil seepage at that particular output shaft. My concerns were that if there is a leak there must be a "play", because the seal was changed about five years ago, not too long in my opinion. I'm assuming that in order to access the...
Thanks for the reply. Unfortunately, I have been the previous owner for the last 12 years and all of the above bolts have been addressed at one point and torqued to specs by myself with a Snap on torque wrench.
Would there be another reason?
Folks, not sure if this issue is diesel specific. However, here are some of the symptoms;
84 BJ60 Hino, about a year ago I drove my truck from Ontario to South Florida, upon arrival two bell housing bolts were missing and the starter almost fallen off. Obviously, those bolts have "rattled"...
Hi there, anyone knows if I can substitute for 3/4 bore clutch master cylinder internal seals or rebuilt kit or new cylinder for clutch with a booster? The one with booster has no linkage.
I purchased one from the UK and waiting, but not sure if it would fit and not sure when it will get here...
Ambrew, not to hijack the topic but but my experience with electric/bloc heater has been a hassle. I've had the breaker trip on cold days to find out that needed to go back in and wait, or crank the thing to get it started which is painful. This happened several times and bad timing, plus the...
Need rear licence plate chrome assembly with licence plate lights and the entire frame with rubber mounts if rust free. No rush, can wait till all is parted out. Cheers! Ed
Funk, both heaters not working I'd be guessing the heater valve in front of the fire wall with the hood open. the probability of both heaters going at the same exact time is slim. In case it is, there is one on ebay for sale eBay Motors: Land Cruiser FJ60 Heater Valve (item 140202373151 end time...
your local dealer should be able to cross reference the part# or at least give you the number for your truck and you can cross reference it with the numbers above. The VIN# will reveal it all. If you can't, send me your VIN and I will inquire the dealer here.
Hope this helps.