Search results for query: *

  • Users: DivByZero
  • Content: Threads
  • Order by date

Forum search Google search

  1. DivByZero

    Thoughts on oil centrifuge?

    I'm seriously considering fitting an oil centrifuge to the 1HZ engine in my 80 series: https://www.scintex.com.au/products/oil-centrifuge This is something Toyota themselves had standard on the Landcruiser in times gone by, on some years of the 2H engine...
  2. DivByZero

    Rebuilding a Harrop Elocker

    Earlier this year, I picked up a A9334 Harrop Elocker for $200, which had suffered a mechanical failure. It had been used in the rear of a Hilux, and came still fitted in the diff centre. My plan was to rebuild it and fit it to the front of my 80, which uses the same locker. The problem was an...
  3. DivByZero

    Full HZJ80 brake system rebuild - booster to rotor

    In this thread, I'm going to give a comprehensive summary of the full brake system rebuild I just did on my HZJ80. I'm going to walk through replacing the master cylinder, all the soft lines, front rotors, splitting and fully rebuilding the calipers, and replacing and calibrating the LSPV. Some...
  4. DivByZero

    Toyota to OEM part number reference

    Toyota don't directly manufacture everything they sell in a nice red Toyota parts box with a 10+ digit Toyota part number. That's not news to most people here I'm sure, but there was a time years back when I thought they did. There are plenty of parts that are manufactured on contract by other...
  5. DivByZero

    Two different flywheels for HZJ80?

    I've got a parts mystery. So I'm going to be up for a new clutch on my HZJ80 soon. Not surprising with how I drive it. While looking into which clutch I'm going to fit, I decided to check the parts catalog and confirm which flywheel I have. There are two "typical" flywheels for the manual diesel...
  6. DivByZero

    Water storage on your 80

    One thing my rig isn't setup for is anything fancy when it comes to water storage. We chuck a water jerry can in the back for longer trips, but I've seen a few rigs where people had a pump rigged with an onboard water source, which gave them easy permanent access to water, and low pressure flow...
  7. DivByZero

    HZJ80R high pressure power steering hose replacement options?

    The power steering lines on my HZJ80R are rotted. They're the original lines from 1996, and I've got multiple slow leaks on the low pressure side, and weeping on the high pressure side. They've been on my list to replace for awhile, but they're a bit expensive. The lines are sold as a complete...
  8. DivByZero

    Denso parts catalog and service material

    I posted something new in the following thread which might be of interest to people working with Toyota diesel engines of any generation: https://forum.ih8mud.com/threads/all-us-landcruiser-lx-service-manuals-1960-2018-all-years-all-models.1268628/
  9. DivByZero

    ALL US Landcruiser/LX service manuals 1960-2018 (all years all models)

    I present to you "The Complete Toyota Land Cruiser Field Service Manual" 2018 edition: TheCompleteTLCFSM2018.7z.torrent - 218.7 KB file on MEGA - https://mega.nz/file/JYkiVQzI#SsjsoKs99TFQ9R8LQth6aM9QNFohHIV_Nh3m7dIOQ9c TheCompleteTLCFSM2018.7z (21.7GB) - 21.77 GB file on MEGA -...
  10. DivByZero

    Body mount torque specs?

    Anyone know what the proper torque specs, or failing that a good general approach is, for tightening up the body mounts on an 80? I just loosened all the body mounts to jack up the body off the frame a bit. Was surprised I couldn't find a section in the FSM on replacing the body mounts, but...
  11. DivByZero

    Slightly lifting the rear body off the frame in the driveway?

    Can it be done? I'm trying to replace the exhaust on my HZJ80. The rearmost section of the exhaust pipe runs over the frame, in a narrow gap between the body and frame. Other people have been able to slip the pipe through at a magic angle, which I've discovered doesn't work if you have the...
  12. DivByZero

    Rust Repair - What would you do with this?

    Some background first of all. So my 80 is in pretty good nick overall, and the frame is rust free. The body has some issues though, with some attempts at a repair by the previous owner. Whoever owned this rig before liked to do some water crossings it seems. However they didn't take the time to...
  13. DivByZero

    Anyone put a bypass oil filter on their 80?

    I've been considering a bypass oil filter for my HZJ80 for the last six months or so. This is a low-flow secondary oil filter that filters down to 1 micron or below, keeping your oil much cleaner than the normal full-flow oil filter. Over time all the oil runs through the secondary filter...
  14. DivByZero

    Factory Service Manuals for Japanese models (IE, HDJ81)?

    I have a question that I haven't been able to find an answer for. What factory service manuals (if any?) were/are available for 80 series Landcruisers which are domestic Japanese models? Here's what I understand so far. Toyota have four main sales areas: Japan, Europe, "General", and...
  15. DivByZero

    What's the most neglectful thing you've ever done to your 80 series?

    So we can all be a bit obsessive about our rigs, but I'm sure I'm not the only one that's pushed things when it comes to maintenance or repairs. I currently know I have a bad wheel bearing on the front driver's side. No noise, but it has play from when I put it into a wall during some 4x4 about...
  16. DivByZero

    Retro-fitting factory cruise control

    So my 80 series doesn't have cruise control. I find it mildly annoying, as I do a lot of long drives, and I appreciate being able to regulate my speed on the motorways with a flick of my finger, and give my foot a rest. Most 80's here in Australia didn't have cruise control however, and models...
  17. DivByZero

    PSA - You NEED an impact wrench!

    So if, like me, you're somewhat mechanically inclined, and don't mind spending your weekend pulling bits off your 80 and putting them back on again, but this is your hobby and not your day job, you probably have a limited set of (hopefully) quality tools you've picked up over time to help you...
  18. DivByZero

    Overthinking things - Need some advice on a snorkel

    So I've been going back and forth on what to do about a snorkel for my 80 series for awhile now. I think it's time to make a post here and get some other perspectives on it. So here's a rundown of my thinking. When I got my 80, it didn't have a snorkel. I was also certain I wasn't going to fit...
  19. DivByZero

    Interest in scanning 80 series non-US repair manuals?

    I always like to have access to good information when I'm working on my vehicles, and as part of this effort I've always been on the lookout for the genuine repair/service manuals published by Toyota. I'm in Australia, so we have a different set of manuals from the US, which as I understand it...
  20. DivByZero

    I don't remember my 80 coming with this....

    I saw a genuine Toyota part a few months back that made me laugh: Must have been an optional accessory, I didn't get any hoes with mine! ;) I ordered this while replacing some fuel parts for my HZJ80, just to see if it was a one off. Nope, that's exactly what came on the label. Anyone else...
Back
Top Bottom