The 3 pin will work, you’ll have to cut off the ring terminals and put spade connectors on. There are wiring diagrams out there to explain how to wire the old 3 wire harnesses. You’ll need to look up the Albright information understand where to put what wire.
The contactor itself will fit...
Wits End sent me a message about an old order I have with them. Sounds like he had a supplier issue with what I had ordered (ashtray panel) and has a lot of rework. Just wanted to let folks know that at least in my case I was contacted.
Finally getting around to installing the lift. Dobinson's 2.5 lift with IMS shocks. Doing this by yourself is a job. "While I'm in there" I'm doing;
extended brake lines (Metal Tech)
replacing all the non-extended lines with new lines from Toyota
new OEM bushings in all the links (except...
I just did this. 4.56 and Eatons. I sent the 3rds off to East Coast Gear Supply. There is still a decent amount of work on your end with all the wiring.
Dealing with ECGS was about as easy as it gets. They had them back to me in like 7-10 days. Would definitely recommend them and doing...
I was learning about piston soaks in chemicals to free up oil control rings or piston rings, so I decided to give it a try. I used Berryman's B12 Chem Tool injector cleaner since there were some good results with that by others. Didn't seem to help my #5. Here are the numbers. Not sure why...
Got a stumper for y'all. How does this happen? Then only thing that is different on this sample is I started to use Yamalube Ring Free in the fuel and the truck went on a very long road trip, like 1100 miles.
This is the result of 7 hours of my time today. If I could do it all over, I would send the wheel out to someone to recover it. Not hard. Just time consuming.
This is a used, complete Landtank seat extension with all the machining complete on the followers and rails and a functioning seat motor assembly out of a drivers side seat. Fix your seat motors and get 2" of additional leg room in one go. I'll even throw in a complete set of bearings, the...
I went to the Southern Cruiser Crawl in Hot Springs, AR. Few pic from the trails. With no lift and 27 year old suspension, I'm pretty happy with how it went. No damage and my wheeling buddy had fun.