Search results for query: *

  • Users: Lordhelemt
  • Content: Threads
  • Order by date

Forum search Google search

  1. L

    2022 GX460 FSM

    Anyone know where I can buy a FSM for a 2022 GX460? In the past I've been able to find most fsm's on ebay but I can only find one for the older generation GX. Getting raped at the dealer on some maintenance items so I'm just going to take care of these myself. Thinking it will be worthwhile to...
  2. L

    SOLD  NOS Fj 40 fuel sender genuine (Arlington, VA)

    New old stock fuel sender and gasket for an Fj40. Local pick up or $65 shipped. PP as friend and family or gross up for fees.
  3. L

    Carb vacuum routing question

    I know this has been asked several times on the forum but I’m still uncertain on the routing so I wanted to double check. The mess of vacuum lines and lack of a color diagram has me questioning if I’ve got these hoses routed correctly The 4 lines on the passenger side of the carb rout to 4 hard...
  4. L

    FJ60 4speed shift lever pins (ones in the top cover) replacements?

    Took the project 60 out for a drive today and the shift lever was moving all over the place when trying to go into reverse. Pulled the boot and shift lever and the 2 pins in the top cover appear to be worn/loose and is no longer holding the shift lever in position (the lever rotates inside the...
  5. L

    Vacuum hoses on the air cleaner housing. Where do they go?

    I'm pretty close to having this 60 up and running. The vacuum lines on the left (when facing the engine) were missing, not connected. I've figure out most of it but still have 3 lines that I don't know where they go. Anyone know where these go (circled in the pic). Thank in advance for any help.
  6. L

    Fj60 valve adjustment

    I plan on tackling a valve adjustment tomorrow. Are there any strong opinions on doing them hot or cold?
  7. L

    83 fj60 carb rebuild question

    I’m finally getting around to cleaning/rebuilding the carb and I have a couple of questions. The power valve is missing the retaining washer. Does anyone know what size washer is used or should I just pick one up from the dealer. Does anyone know know what sized primary and secondary jets...
  8. L

    2022 GX460 Hitch Question

    Wife picked us a new GX last night and we're looking to add a hitch. I can't find a part # for the '22. Can anyone confirm if PT228-60140 will work on the 2022 GX.
  9. L

    Replacing vacuum hoses and broke the nipple off a valve

    Replaced all the vacuum hoses but broke the nipple off this valve. Does anyone know if this can be picked up at a local parts store? I’m not sure if this a standard or Toyota specific part
  10. L

    Smog pump hose 17343

    Looking for a solution to repair/replace hose 17343 (smog pump to the air rail). The one I have has a hole in it and honestly the others are showing their age. It looks like they are NLA. Anyway to repair the hose or is there an aftermarket solution?
  11. L

    Carb mixture screw

    Looking to adjust the carb but i'm not sure where the mixture screw is located. Is this the location (see pic recessed circle). If so how do I remove the cap, it sits flush with the carb body. Drill it and pull with a sheet metal screw?
  12. L

    FJ60 reseal and while I'm in there questions

    I work slow but I am finally making some time to get the project 60 on the road. Now that I have finished the suspension and front end now it is time to address the engine. I'll check the compression numbers but I think it drives as it should (my first 2F) but it is leaking everywhere. So I plan...
  13. L

    '83 fj60 fuel tank drain plug size

    So I'm in idiot. The fuel tank in my project 60 had some debris in it so I pulled the tank a few weeks ago to clean and inspect it. Finally got around to getting it back in the truck but I have no idea where I placed the drain plug. I was hoping to ordering one or grabbing one at the dealer but...
  14. L

    60 knuckle rebuild. steering arm wont separate from the knuckle

    I'm rebuilding the knuckles on the 60 (first time) and am having problems removing the steering arm. The pin is in there pretty tight. With the lower pin removed and knuckle off the truck I've tried to drift it out but it doesn't want to budge. Made a make shift spreader with some threaded rod...
  15. L

    Resealing an FJ60 2F motor

    I'm prepping a FJ60 for my son and the next on the list is to get it to leak less than my Rover. Can the engine be resealed in the truck or is it easier to do out of the truck? Tons of oil on the Tcase as well so that may need to come out too. My (his) first Cruiser so I'm not sure where they...
  16. L

    Tie Rod ends. Which ones do I buy?

    I'm finally getting around to overhauling the steering components on the 60. CruiserCorps has a reasonably priced kit but they are out of stock. Saw a kit on ebay but it is unbranded. Being new to Toyota's I'm not too familiar with which aftermarket parts are of decent quality/value. Any...
  17. L

    FJ60 OME lift question rear springs

    Installing a set of med duty OME springs and I have a question about the metal bracket/rubber isolators that are on the original springs. Do you re-use those or install the new springs with them?
  18. L

    FJ60 Fuel Tank how much is too much corrosion?

    Dropped the tank today to prepare it for an efi fuel pump. Took a look in the tank and there are few rust spots but they don't look bad by any means. However, the fuel reservoir where the pickup sits is corroded to the point where it is beginning to flake off. Ordinarily I'd just buy a tank but...
  19. L

    LS Swap vs Holly Sniper on the 2f

    Going to start the 60 project and at the very least the motor needs to come out to get resealed and may as well do the clutch while I'm in there. To make this a little more drivable I plan on adding a Holly Sniper but since all this stuff is coming out anyway I'm considering a LS swap (probably...
  20. L

    Anyone know how to release a stuck tailgate?

    Stupidly I slammed the tailgate s*** a little too hard and the rod that goes from the tailgate release handle fell off the lock mechanism. Unfortunately this happened on the drivers side and the access panel won’t fit anything other than an infants hand. I tried fishing a wire unsuccessfully for...
Back
Top Bottom