Search results for query: *

Forum search Google search

  1. G

    Need some help with this Safety Dash

    Taking the window down will be an issue onto itself. Lets just say I cannot get the window down. But that thing is not moving up , down or sideways. Will soak it with penetrating oil and see if that helps.
  2. G

    Need some help with this Safety Dash

    I have been trying to remove this upper safety bar , All bolts removed but its wedged in there and I cannot get it off. Any help .. What am I doing wrong.
  3. G

    24v disaster

    I am in need of information. I have the dash light number 6E194 these are the bulbs for the gauges and speedo. I see a resistor in the back of the gauge cluster but I have not traced the circuit. My questions ; Is the resistor for the Amp gauge ? Are the 6E194 bulbs 24 Volts ? Thank you
  4. G

    24v disaster

    I am doing a fully fused system. Once I have gone through the diagrams and drawn the actually component placement I will update my diagrams with the components and part numbers and of course pics of the items..
  5. G

    Wanted  BJ42 24 volt 1982

    Hi Looking for a radiator for a 1982 BJ42 (in good shape or not ) . I will recore here at my location. ( New Brunswick, Canada) PM me..
  6. G

    24v disaster

    I will post a list of the components and their part numbers and where I got them (most from Amazon) Ahh the bulbs are all LED (hence the LED electronic flasher) I have the part numbers . But I will do a test fit , as I see maybe a small problem with the rear lights assy. The LED bulbs might be...
  7. G

    24v disaster

    Here is what I plan on doing.. I have 2 diagrams. ( I am not a designer nor do I understand the electrical symbols. This is free hand). If you see any discrepancies be gentle ..
  8. G

    24v disaster

    Here are some of the horrors that awaits me.
  9. G

    Will a GM 10Si fit a BJ42

    I found a shop in Moncton New Brunswick, MR. Starter and Alternator, who is willing to work with me to fit a 24 volt Delco 1 wire 10Si. I will post some pics in the next days. I would take the pics today , but we are in a snow storm (not really buts its snowing steadily) and its 0 Celsius ...
  10. G

    Will a GM 10Si fit a BJ42

    I am trying to, but not sure they can get parts for it and I also wanted to rewire to have a single wire exciter. Internal regulator and rectifier
  11. G

    Will a GM 10Si fit a BJ42

    I need to replace my alternator and the voltage regulator. However I am not spending 1000 CDN on alternator and I still need an external rectifier and voltage regulator. There are 24 volt 10Si single wire alternators. If I have to machine a bracket then so be it. As for the single wire that's...
  12. G

    24v disaster

    Well here we are 1 year later and this year its colder than the North Pole. I have to thank the community with such great ideas. Going with 2 12 V batteries, bring everything back to 24 volts. I did have her running in Nov before putting her in the garage. So now I dig into the wiring loom ...
  13. G

    500,000 km 1FZ-FE series 80

    Thank you..
  14. G

    500,000 km 1FZ-FE series 80

    well here is what triggered me. When cold usually well below -20 C after a few minutes the temp warning light comes on for about a minute or so and goes away. The truck is still in the cold range. At first I thought it was a cold water indicator as well, but notice that the light comes on...
  15. G

    500,000 km 1FZ-FE series 80

    Getting close to the half a million milestone on original engine and still pulling like a train. Does not burn any oil, but has a leak I believe is coming from the front. Too cold to go throw myself under a truck. So my question is. Do I do preemptive head gasket and a valve job ( I do get...
  16. G

    A little help with availability BJ42 24V glow plugs canada

    Hi. I am in the same boat as well. At present I have not found any OEM or third party harness. After tearing into the mess the PO had left, it is apparent that these Landcruiser's benefit from top notch wiring and connectors. If not for the butchery the PO has made, the harness is in great...
  17. G

    A little help with availability BJ42 24V glow plugs canada

    Jim what a great outfit 4 Wheel Auto, talked to Dan was nice to get the parts I needed and then some. Got my order out the door in an hour of when I called. Super nice to deal with Thanks Grey
  18. G

    Heater core and related parts

    I have to say dealing with CityRacer was a very satisfying experience. The online store was great calculated the International shipping and I got a refund on shipping. They seem to have a great inventory of much needed parts. Thanks to all whom suggested CityRacer. Grey
  19. G

    Heater core and related parts

    Trying to get my Beast ready for winter and I am trying to find a heater core and other diffusors for windshield defrosting. Anyone have any ideas on how I could get these parts and if there are similar parts I can use. The only other option is to go with a universal kit. I live in New...
  20. G

    A little help with availability BJ42 24V glow plugs canada

    Its a 1981 Its a 24v setup but the PO had it wired to Ford style relay. The source was from a single 12v battery to the glow plugs activated by a push button. I am rebuilding all of the wiring and want to run this off a 24 v source. On another post I received some part numbers for 24v Glow...
Back
Top Bottom