Search results for query: *

  • Users: EricUT
  • Content: Threads
  • Order by date

Forum search Google search

  1. EricUT

    TPS Error Diagnosis Help/EVAP Qs

    Hi, could use some help diagnosing an issue on a 2001 with a TRD supercharger running a Unichip piggy back controller. It ran fine for years and thousands of miles, then started throwing codes for throttle position sensor failure, P0120/P0121. My son has been driving it for the past couple of...
  2. EricUT

    Early Failure of SPC UCA Ball Joints?

    Hi, quick question to see if anyone else has experienced this. Will start by saying our 2001 build incorporated a large number of Slee products and I’m a big fan of the company, so this a very part-specific and not about Slee overall in any way. I have reached out to them on this but haven’t...
  3. EricUT

    Resuscitating a Dead Odyssey 34R AGM?

    I have a dual Odyssey battery setup with a Redarc isolator and BCDC system. Worked great for about a year, zero issues, then I had to park the truck for a couple of months. I bought the $200+ Odyssey charger which was supposed to maintain that AGM perfectly, but instead of holding it at the...
  4. EricUT

    SOLD  Utah: Air Lift 60728 Air Bags, 80 and 100 Series

    I bought this kit and then realized it wouldn't work with my lifted 100 Series. It's brand new in the box - box is showing some wear from being my garage for the last year. Asking $100 plus shipping. You'll definitely want to confirm that it works for your truck, but per the website, it...
  5. EricUT

    SOLD  SoundLINQ3 VAIS SL3B Bluetooth Interface Adapter, BT Audio for 2001-2009 Toyota and Lexus

    I bought this through a other Mud member a few years ago but never installed it. I know very little about it, but the gist is it allows you to play music from your phone over Bluetooth for certain Toyota and Lexus models from 2001-2009. Here's a link to their website: 2001-2009 Lexus Bluetooth...
  6. EricUT

    Slee Second Battery/ARB Twin Compressor Question

    Wondering if anyone with this setup could help me out. Where did you mount the manifold? The way I've got it set up, I might need to get a couple elbows to make kind of a universal joint connection to tie into the braided line because of the angle it comes in at, and I'm not too sure where to...
  7. EricUT

    What the hell is that?

    I've had my dash apart for weeks doing different projects, finally done and putting it back together, and have a few things I don't remember taking apart lol. So in no particular order, here's my "WTH is that" list of shame 😂: What's this cord on a retractor? Seems like maybe it would...
  8. EricUT

    Anyone Know Where to Get These Cool Terminal Expanders?

    I'm looking for a good solution to adding space for more standard ring terminals on both batteries (not sure what to call it?). I see a lot where the wires are held with Allen set screws, but I'm wanting regular bolt-style 5/16" or 3/8" terminals. I think I got this photo off Slee's site at...
  9. EricUT

    Fuse Subpanel w/Accessory Power

    I'm adding a small, 6 fuse subpanel to make it easier to add some low draw accessories like gauges, etc. Nothing too big, and the total load well below 60A for the whole thing. My plan was to run 6 or 8 AWG wire to it off my auxiliary battery, but I'd like to have all the fuses in it switched...
  10. EricUT

    Won't fire, what do you think?

    This is going to be a shot in the dark (and a bad ramble) because it could be so many things, but here goes. I just finished up doing a bunch on the truck...new timing belt/water pump/fan bracket&clutch, starter, alternator, and adding a TRD supercharger, which is basically a glorified...
  11. EricUT

    Has anyone tried to install a Unichip with the PnP harness?

    Hi, as I've posted in a few threads, i'm installing a TRD supercharger on my 2001, and it's turned into an ordeal finding parts, time to do it, etc. Anyway, after trying unsuccessfully for weeks to get the the supplemental installation manual for the TRD piggyback ECU, I gave up and just went...
  12. EricUT

    Injector Seal Lubricant, Pulsation Damper Reg Questions

    Hi, two admittedly dumb questions. First, what do you guys use to lube injector O rings? The FSM says to use gasoline, but internet folklore says that's a terrible idea, lol. And others say use motor oil, dielectric, spit...Thinking maybe this is one of those things where anything will work, but...
  13. EricUT

    Dielectric grease and other hose questions

    I don't know how many hoses I've changed out in my life, countless, but never as many at once as I am on the cruiser. Far cry from the five hoses and ten clamps on an old muscle car, lol. And it's like a puzzle getting all the angles right. I read a post somehwere with people recommending a...
  14. EricUT

    Setup Question for Guys Running TRD Supercharger

    In the installation instructions below, it says to remove the plug and replace with a barbed fitting for Tundra and Sequoia installs. Mine came out of a Tundra and has the fitting installed, so my plan was to pull it and put a plug back in. Now I'm thinking it would make a good port for the...
  15. EricUT

    Wanted  Doug Thorley headers, 100 Series 4.7L

    Trying to find headers and cat back in the Salt Lake area, or willing to pay for shipping if practical.
  16. EricUT

    Diagram or List of All Hoses?

    Lots of Qs from me today! I have the intake off and able to really see everything, and realizing i need to replace a lot of these hoses, maybe all of them. Having a hard time finding a definitive list or diagram though. I came across this post from a couple of years ago, but some of the part...
  17. EricUT

    Aftermarket Knock Sensors?

    Not sure whether I broke this knock sensor somehow getting the intake off, or if the mice that look to have made a home in there chewed up the connector. OE units are about $170 each, and after market like Beck/Arnley are like half that. I'm pretty into keeping with the OE parts, but this one...
  18. EricUT

    More Timing Belt Qs, Alternator Mounting

    Doing a timing belt change in 100°+ weather, and not trusting my eyes. Guys that have done a number of the these...is this crank seal seated? I just made a poor man's press from PVC pipe and the crank pulley bolt, and I'm not trusting it. Mostly worried about the bottom.
  19. EricUT

    Consensus on Air Lift Bags w/ 2" Lift?

    Hello, I'm adding Air Lift bags, and have the OME 2865 springs, so have about 2" lift. I'm reading a mixed bag of what to do in old posts, sounds like some guys just run the standard Air Lift 60728, some guys cut the bump stop to leave 2", and it sounds like some have ordered longer bags. What...
  20. EricUT

    Scanguage II, Trans Temp, 2001

    Hi, I've read so much conflicting info on this, mostly in old posts, so hoping to get a recent and definitive answer. Will the Scanguage II provide (accurate) ATF temp readings in my 2001? I'm going to have to use this thing to tow a fairly light camper trailer for at least the time being and...
Back
Top Bottom