Search results for query: *

Forum search Google search

  1. Yotamonster

    86 Extrq cab on 2.5 ton Deuce frame....

    Hey everyone starting a new build thread here, recently I have really began to accumulate and build 2.5 ton Deuces, I got a crazy idea the other day while pulling parts off of my "parts" Deuce to pull the cab, swap a 12 valve cummins in and set an 86 yota cab on the frame. I already have a 12...
  2. Yotamonster

    Another SAS and Lift post!

    Here is a picture of our motor mounts. I didn't like anything I was seeing online for a "LS swap" so I made my own
  3. Yotamonster

    Another SAS and Lift post!

    Engine is set in place and 100% bolted down. I would also like to add, no cutting was necessary to either the firewall or trans tunnel (so far) but still need to get the trans crossmember installed and the T-case is going to be cutting it damn close!
  4. Yotamonster

    Another SAS and Lift post!

    Engine and trans ready to go inGetting everything lined up where we want it
  5. Yotamonster

    Another SAS and Lift post!

    Trans and T-case (built 4l65E and Dana 300) Rear axle all trussed up
  6. Yotamonster

    Another SAS and Lift post!

    Sorry everyone be patient with me, going to take a few for me to remember how to download pictures🤣
  7. Yotamonster

    Another SAS and Lift post!

    Hey everyone!!!!! Sorry its been a really long time since I have posted on here! I've been out getting married and having kids between now and my last post. I had to push this build off for some time due to the busy life of children and work but we are back to rock'n and roll'n! So just alittle...
  8. Yotamonster

    Another SAS and Lift post!

    Got the rear axle mocked up on the truck! as you all know we flipped the rear axle 180° so we had to cut new notches in the housing so the ring gear would fit. Got it done with nothing more than a sawzall and filling drill attachment. (Our cuts in blue circles) factory in yellow, NOTE: YOU ALSO...
  9. Yotamonster

    Another SAS and Lift post!

    Here is a few pics of my spring perches vs the ones that came in the SAS kit, Ofcourse Everything such as angle, distance between perches and height was measured and leveled off before everything was welded on, The pictures are just for comparison😁
  10. Yotamonster

    Another SAS and Lift post!

    Happy Friday everyone! I've been making progress on the Corvotta rig! I got the front axle Trussed and mocked up on the truck, I'm going to have to get some custom U-bolts made because the ones that came in the Trail gear kit are too short for an FJ80 axle (which is why they look alittle off on...
  11. Yotamonster

    Another SAS and Lift post!

    So I made some more ground today, got the front hanger tacked up, springs mocked up and rear Spring tubes welded in. I want to make note for everyone that is on the fence about whether or not they can do a SAS their self at home and the answer is YES you absolutely can! The directions calld for...
  12. Yotamonster

    Another SAS and Lift post!

    Ya so this thread started just as me asking for some SAS info and quickly spiraled into a complete truck build haha. Just a little recap on everything that I'm doing so any new followers don't have to dig through pages of posts I am putting a 96 LT1 Corvette motor in my 86 Toyota pickup, 4l60E...
  13. Yotamonster

    Another SAS and Lift post!

    Ha! Nope I'm in pretty deep, anyone have any ideas on how I can beef up the frame any?
  14. Yotamonster

    Another SAS and Lift post!

    Alright so the SAS has officially started, I was not able to track down a cutting torch or a plasma cutter for a reasonable price and my torch stuff got stolen so I figured what the hell! One guy on each side with a Grinder and minie sledge worked great to get everything off. Took some time to...
  15. Yotamonster

    Another SAS and Lift post!

    Also realized I never posted a pick of the motor all finished up so here you go.
  16. Yotamonster

    Another SAS and Lift post!

    Alright i figured I Would post an update On what I have been upto the last few weeks! So I took the truck down to have the frame inspected because the previous owner said it was in a accident in the past and i did not want to weld on a bent frame. Turned out it was good thinking because the...
  17. Yotamonster

    Another SAS and Lift post!

    Here are some pics of what I have got done today, next up SAS!! I have the kit in my shop now, it's a Trail gear 4in HD kit🤘😎
  18. Yotamonster

    Another SAS and Lift post!

    Here's the link for the video from today Watch "Friday project!🤘" on YouTube
  19. Yotamonster

    Another SAS and Lift post!

    Hey everyone I'm back! I've Been having trouble logging in for some reason it's been telling me I am banned from using the site? Haha Anyway for anyone that may be intrested and following my build I have been posting to YouTube, I'll still be posting here for all your expert help tho😁
  20. Yotamonster

    Another SAS and Lift post!

    Well the Highsteer kit FINALLY got here!!!! The LT1 is almost 100% done as well
Back
Top Bottom