Have a 3B from a 1984 BJ60 (mfg. date 09/1983) that is suitable for parts or a rebuild. This engine ran when removed, but when increasing the RPM above idle (approx. 8 -900 rpm) it makes a knocking sound. This happened right after an oil change and fuel filter change while trying to work an air...
Rear cylinders are dry, no leaks there. I bench cycled the new master cylinder into a jar and continuously topped up the reservoir until no bubbles were coming out of the lines. After install I bled the brakes with another person pumping the pedal and holding press. Then starting at furthest...
Jzilla, pretty sure the calipers/rear cyl. aren't leaking, but I'll inspect them to confirm. I was thinking the DOT 3 I'm using might be eating the rubber (or whatever material, neoprene?) seals as I notice a black contamination in the clean fluid after cycling the brakes a few times. but the...
In my '84 BJ60 I replaced the brake master cylinder a couple of weeks ago with a new part sold under the Beck Arnley brand. Post install inspection reveals that it's already leaking out the back, and down the front of the brake booster. I used a generic auto parts store brand of brake fluid...
Wow, looks like some beautiful country to travel through. Thanks for sharing the photos with us Glenn! Makes me want to jump in the truck and get off the pavement.
That is an incredible view looking out the front of the wagon Mat, been too long since I have seen something even close to that from a Cruiser.
Good to hear that Ryan seems to be doing well. From the '09 trip report it was cool to read how you guys met him mostly by chance if I remember, and...
Wow, beautiful pictures from a beautiful place. You guys are indeed blessed to have ventured through there. Wish I could have gone.
Ryan was the fellow that was bottle feeding the fawn and guided the CC members to a mountain top overnight camp out, correct?
I remember he had a serious...
Sorry Bill and Gary, can't make it this year. My usual rotation at work was shifted two days and now I'm workin' through the weekend. Was trying to get Sat. off, but there's nobody else to cover.
I wish all attendees a safe and pleasant trip, and I hope to see you guys soon on one of the...
A Friend of mine is trying to source a Radiator for a '99 Range Rover with a 4.6L V8
Thought someone here might know of someone who deals with Land / Range Rover parts?
Thank you for any help.
Mike
Yes, right before the short climb to where the smokey cookout was, there is a route that goes to the left. That brings you to the bottom of the hill where my truck (the red 60) is parked in one of the pictures. No steep climb/descents , but it is quite narrow.
Evan and Myself both had a great time, this was Evan's first wheelin' trip. Was great to see old friends and meet new ones. Hadn't wheeled "Lando" in about 2 & 1/2 years or so, all the previous issues seem to be taken care of but I think some lower gears are needed. This was a steep trail...
Hopefully I can make it for this trip. My 4WD is serviceable again and I'm sure Evan would love a day trip out with Dad. Shouldn't be anything to stop us from going, just need to trim the u-bolt ends down for clearance. Just got that case of asthma do deal with... gotta asth ma wife.
Wuhh...