2 extra threads should be fine, in terms of avoiding interference with the camshaft. I would re-chase those threads just to ensure it is clean from any debris, so you get a nice clean torque pass. Also, I used the ARP washers.
Hello
I am experiencing front driveline vibrations.
Has anyone replaced the transfer case front output bearing while the tcase was in the truck?
I'm experiencing driveline vibrations after installing a DC driveshaft.
I can wiggle the front propeller shaft and there appears to be about 1/8"...
Let me know if you have any other questions or want more pics, happy to help.
FYI if you run studs, buy a quality thread chaser M11x1.25 and clean your holes. Do not risk not chasing them if you decide to run studs.
Seated fully, cleaned threads prior with thread chaser.
Plenty of thread engagement.
No modification of studs required.
Don’t sweat it, buy those and forget everything else you’ve read.
Hello!
I am in the middle of a head gasket job.
I wanted to see who has installed their head with the upper and lower intake bolted to the head per the FSM.
I haven't seen any examples of people reinstalling per the FSM.
It seems others only bolt the lower intake up prior to installing the...
I installed the Toyota kit (81110-60P70). I connected the relay as suggested. The driver side is very dim and hi-beam doesn’t work. It's a new bulb, same as other side. It's the side furthest from the battery and ground. The passenger side is bright and hi-beam works fine. I’ve tried swapping...
I connected the relay as suggested. The driver side is very dim and hi-beam doesn’t work. It's a new bulb, same as other side. It's the side furthest from the battery and ground. The passenger side is bright and hi-beam works fine. I’ve tried swapping the bulbs side for side, but the problem...
I have a sandblasted and powder coated fj60 frame. I’m thinking about going a different route with my project. Let me know if you have any questions. Thanks!
$1500
The wiper motor now does not work, but if I ground the hatch to the frame it will. The washer pump fired up one time, while I did not have my jumper test wire connected from the hatch to the body, until I stowed the pump and bag onto the mounting hooks. I believe the ground wire is my issue...