I have to replace my lower oil pan due to rust thru and seepage on the driveway
thanks to Alex79 I have one coming, just have to pick up some FIPG before Tuesday depending on the weather cause this weekend it's gonna rain, not sure about next week yet.
looking at my digital FSM I see that the...
as title says I need one alloy wheel, prefer no gouges etc, but not perfect is ok as I will be sandblasting/powdercoating it to match my existing wheels
I am in WV zip is 25309 if you have anything let me know
I bought and installed the Slee headlight upgrade harness, the center radiator support is currently off the truck while I configure a couple positive cables [ winch and second battery ], when those are done, I will be getting ready to reinstall the ARB with my new winch and lights [ johnny lange...
REAR drivers side inner fender well where it meets the rocker and enough to patch to existing
let me know if you have something you can cut out for me
doug
had to change a reverse bulb sunday, and on the drivers side the "seal" or gasket [small ring of rubber] where the socket locks into the taillight housing was all melted and squashed, while the passenger side was just perfectly fine.
haven't tried a dealer or anyone yet, just wondering if a...
I just need the front piece that goes on the front edge tan/oak across from driver to passenger but if somebody has the whole set I will take that as well. let me know if you have something
doug
1996 FZJ80
tried a search, found one thread mentioning locating pins.....is there a fastener behind the badge attached to the pins? or??? going to do the black/black chrome thing [mine are yukky gold] while some places getting fixed at the body shop and need to remove it.....lower 4wd badge...
ok, I amreplacing various lines on the cruiser, most importantly the two long lines from the lspv to the front of the vehicle, one line is slightly longer than the other, and goes to the front just shy of the radiator, while the shorter one ends up in the fender well on top of the frame at an...
so, I put the cruiser up on some tall 6 ton stands after work yesterday, to facilitate drooping the axle to install my OME springs/shocks AND replacing the 2 main brake hard lines because at the front clamp one had rusted where the rubber isolator surrounds them.
had also bought front calipers...
need flares for both rear fenders, small piece on doors a bonus, will consider whole set if that's what you are selling. white would be nice but fixing rust and painting so color not a deal breaker
my drivers side has broken mount and both rear sides are broken where top mudflap screw mounts...
guy's , my cruiser is getting ready to get a couple replacement doors [thanks CruiserYard] while the rocker panels are being replaced and while they are being painted to match I will need to replace the vapor barriers after I get it back [I am removing the door panels and the rest of the...
I am doing some work to the cruiser and will be installing my new OME springs in the next few weeks and from the Slee site:
IMPORTANT. In the US, with left hand drive vehicles, if the springs are labeled DS and PS, we install the DS (Driver Side) springs on the PS (Passenger Side) and visa...
ok, so im going to be replacing my rear calipers/rotors this weekend or beginning of next week, and my local dealer says they don't list Mr T remans....so my options are
NAPA -online says NuGeon for $82.80 and Eclipse for $57.99 and store guy is the same for the Eclipse, and makes no mention of...
will he ever make anymore? I know the site says starting to get back to it, my carpet/vinyl trim is ratty in a couple spots and would like a better option....anybody else doing this kinda storage solution?
thanks
doug
so, I knew I needed new lug nuts a while back, so I ordered these http://www.ebay.com/itm/24-EXTENDED-50MM-LEXUS-SCION-OEM-OE-STOCK-FACTORY-WHEELS-MAG-LUG-NUTS-12X1-5-1-5-/181221057001?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a319de1e9
and I waited until I had ordered new tires and had my...
I was going to get a set of wheels as spare and have them powdercoated but I hit something on the interstate [never did see what] and blew the sidewall out of a perfectly good tire, so decided to upgrade to 315/75/16 MTR's and just have my one and only set powdered while I was away working out...
ok, so my cruiser has been down a month, started with a valve cover gasket / tune up / ac hardline from passenger firewall to drivers fenderwell[that was a bitch], along with replacement of the o2 sensors.......got the valve cover off without a hitch and oil drained for a change, then my brother...
I have a 1996 so that style lugnut base would be preferred
looking for a set to bead blast and paint and clear powder so don't have to be perfect, must be willing to ship to me etc.....let me know what you have
thanks
doug hunt