Search results for query: *

Forum search Google search

  1. B

    windshield wiper constant power or switched power?

    So I went back and revisited my wiring of the wiper switchand wiring harness to motor. Turns out I had 12v+ wired to switch and had 12v+ wired to motor. After reworking the wiring so there is no direct 12v+ to switch and ignition switched 12v+ to motor things are somewhat better. The...
  2. B

    windshield wiper constant power or switched power?

    My windshield wipers on my 1970 fj40 works well except that it runs down my battery when parked. I have the 12v+ directly to wiper motor as in most of the diagrams I found on this site. Should the 12v+ power be from ignition switch power or always on power? If it is supposed to be always on...
  3. B

    1970 fj40 wiper motor questions

    I got the wiper motor to work. The problem I am having now is it won't shut off when I push the wiper switch totally in. If I connect the blue/blk stripe wire, that should be soldered into the top reed of the park switch, to the blue wire on the motor connector it will turn off. If if put the...
  4. B

    1970 fj40 wiper motor questions

    My wipers on my 1970 fj40 are not working. I would like to try to see if the motor is working first. Can I put +12v to the all blue wire on the windshield wiper harness connector by the motor and place a neg cable to either the blue/red stripe wire or blue/wht wire to see if motor turns over...
  5. B

    Troll Hole woes

    Latest update on my troll hole carb issues. Things are looking up. I think the best thing I did was cap off the carb port from the carb to distributor. I also capped off the the distributor. I also changed out the rubber hoses and replaced the fuel filter. I than did the best drop lean...
  6. B

    Troll Hole woes

    Then what do you call it then? And can the two work together or do they clash?
  7. B

    Troll Hole woes

    Well, I was thinking that maybe the vacuum retard distributor doesn't play well with the troll hole carb, kinda like your reply.
  8. B

    Can you tell me what dizzy I have?

    Can you use a chinese 2f carb with a vacuum retard distributor? If not why?
  9. B

    Troll Hole woes

    Can you use a chinese 2f carb with a vacuum retard distributor? If not why? Just trying to figure things out.
  10. B

    Can you tell me what dizzy I have?

    I'm new to the fj40 game. What do you have to do to add another port to the carburetor? Can you do this to a f carb and a 2f carb? Thanks.
  11. B

    Troll Hole woes

    I have a new question about my troll hole carb. I did buy a rebuild kit for my carb but I am wondering if I could take the part of the troll hole carb that is made for the throttle cable and attach it to a 2f carburetor that is made for a throttle linkage? Thanks, Buck
  12. B

    Can you tell me what dizzy I have?

    Here are a couple of dizzy pics from my 1970 fj40. Can someone identify for me? Thanks, Buck
  13. B

    Troll Hole woes

    I understand. But what can I do now?
  14. B

    Troll Hole woes

    I am using the mechanical fuel pump. The only carb I have for the FJ is the trollhole carb. I can get a carb kit from cruiser outfitters for the troll hole carb? Or should I contact Troll Hole and get a carb kit? Buck
  15. B

    Troll Hole woes

    Here is the switch I was talking about. I am not sure what it is for. Buck
  16. B

    Troll Hole woes

    I bought the troll hole carb years ago 5-10 yrs ago. Installed right away but didn't do much after that. It probably didn't work right out of the box and I let it sit. It has been sitting 5-10 years in my garage (heated). As for the blue light special crimp, it does give 12v when keyed on...
  17. B

    Troll Hole woes

    It is a august '70 build. It does have saginaw power steering from a pontiac. I put the FJ in 4 wheel drive by the front hubs and put the transfer case in 4 Hi or Low. Just like an old jeep. I do have a switch on the dash that looks like a pair of wheels and axles I think. Never used it.
  18. B

    Troll Hole woes

    Been a long time . I did dump a bunch of sea foam into it. The fuel filter looks pretty good. How do I clean out the tank? It is a plastic tank.
  19. B

    I'm too tall for my own good!

    Here are some pics of my 1970 FJ. I think I have a 4" lift kit on the truck but I am not sure. It is too d*mn rough riding for my tastes. I want something that doesn't bounce around so much. Little history of this FJ. I bought it years ago off ebay. The guy that built it put in a pontiac...
  20. B

    Troll Hole woes

    I have a troll hole carb on a '70 fj40. Some days it works great someday it is CRAP! I have had this carb for a few years and only recently really tried to get it run correctly. I tuned it as well as I could without a tach. Thought I had it running good but still went to a carb guy to see...
Back
Top Bottom