This is a quick update.
Today I have installed the drain plug and add transmission oil again.
The is what I observed and further test I did:
1. The reverse still not working (I still have the truck on the Jack Stand).
2. I removed both front and rear drive shaft and test it again and the...
Hi 2001LC,
Thank you so much. I will follow your advice.
I would probably do the rest of the recommended steps in few more days, as I have not received the new drain plug yet. I will provide another update soon.
Oh, I'm sorry I think I was misunderstanding camino70. I was thinking that the truck cannot be moved, so I won't be able to go out doing anything with the truck. I will try to get the fluid changed again tomorrow, including the transfer case fluid and report back. Thank you very much.
Hi all, thank you.
Today, I have to wait for the transmission pan's drain plug. Last time, I damaged the drain plug so I ordered a new one a few days ago. I previous order an OEM one from eBay but the thread on the pan has gone so I cannot use it. Since the old one cannot screw tight enough and...
Hi 2001LC, Yes. I have both drive shaft (propeller shaft) on already when I first posted here for help few days ago. Thank you for your other recommendation. I will top off the transmission fluid to high mark, and check other things, and test again today or tomorrow.
Hi camino70, Thank you for...
Hi 2001 LC,
Thank you for your detail explanation. I appreciate you very much.
Responds to your comment:
1. I have pressure on the brake pedal and then I put the transmission shift into N, but when I try to shift the 4WD transfer case out of H, it was harder than I used to do. I have a video...
Transmission filter changed and it solved 50% of the problem :)
After replacing the transmission filter, and adding new fluid, now all tires spin strongly on all Gears except P and R.
Again, the problem is that the R won't spin backward. It hesitates a little forward then it stops. It seems...
Hi Spike555, I am so happy when I receive your last message. I also felt that the filter could be the problem but from your detail explanation, it really can be!
Correction: I installed the current smaller size transmission filter on March 26 according to my record. It is not two months ago...
Thank you Spike555. You made good points. When I change the transmission fluid, I also changed the transmission filter as well. I purchase them from the Amazon. The filter is shorter than the original one though but it fits (all 3 screws were matched) ok. The procedure I did is as follow:
*...
Reply to DirtDawg and add more detail.
Yes. I am pretty sure that the Transfer Case is not in Neutral; I mean, in the video, you can see I moved the 4WD gear to H N L, and it is engaged as the linkage moved and clicked on the top of the central transfer case.
The only thing I am not sure is...
It seems that the problem is not the 4WD linkage (at least linkage seems to be OK). I checked it today and the buzzer suddenly has gone (I had not done anything on the 4WD linkage repair or anything). I take the video of the 4WD linkage and it works ok. The problem with the truck won't move...
I have not found anything, a device or parts, regarding the "linkage between transfer case to the transfer case shifter..." yet on the Toyota Land Cruiser or LX 470. I wonder if it is some kind of control electronic device or something like that? I am sure I didn't physically break the linkage...
Yes. I am sure the transmission fluid is at the correct amount. Cold temperatures at the L mark of the Transmission check stick; and when the transmission is warm and getting hotter, it is at the H mark of the transmission stick. I am sure there is no more and no less of the transmission fluid...
Thanks.
1. Yesterday, when I jack up the truck, all 4 wheels un-touch the ground, I can see the front wheels spin forward and back wheels can spin too. It just that the truck won't go in reverse.
2. Today, when I remove the truck from the jack stand, it then won't move forward suddenly that...
1. Do you mean the Transmission Drive Flange to the Front and Rear Transfer Case? Yes, when I place the Rear and Front Drive Shaft back on, I tighten the bolts and they are secured attached to the Transmissions and the other end to the Transfer Case for sure.
2. Do you mean the Drive Shaft's...
Thank you, Spike555 for your detail explanation :-)
I did not unhook the shift linkage when I did the drive shaft u-joint work. I did, however, unhook it to test the PRN to make sure they are in the correct Position and that's after I have this problem described in this post. I am sure they are...
When I turn on the 1999 LX 470 / Toyota Land Cruiser 100 engine with Transmission Gear in P, and 4WD Gear in H, the truck can only move forward in all gears except P and R. When in N, it even moves forward. In R, the truck won't move. I have the truck Jack up and I can see the tire spin so I...