Did the P-side mirror match in size and looks to the driver's side? My color cover is not broken so I could pop the cover off my current mirror and put it on the new one if everything is the same size.
Also, I don't have power folding but I do have blind side checking. I see the amazon one...
I've got a 2019 Sequoia in black with a broken side mirror. Apparently OEM mirrors are backordered nationwide. Does anyone have experience with the TRQ/1A Auto side mirrors, and would you recommend them? They appear to be available and are also less expensive...
I see BFG does make the same size 235/75/15 as the Uniroyals I am replacing. They also sell the 31x10.5s for a bit more. So I guess when people want to get the extra inch height you have to also go wider. And the 7" rims handle that without a problem...
I have a 60. The tires on it from the prior owner are Uniroyal Liberators P235/75/15 108s. I see the general consensus is 31x10.5x15. These 31s appear to be quite a bit wider. Does anyone ride on 235s? I see BFG A/T exists in both of these sizes.
This is some pretty old and long time seepage/spray pattern under my old Cruiser. I'm thinking maybe it's the output shaft seal, but wanted to check with the brain trust. Thanks.
How did the process go with Cruiser Corps? Has the kit arrived and are you happy? I'm on their site today and see they have what looks like 3 set ups: Heavy, Light/Medium, and then Medium with anti inversion kit, which is actually cheaper than the standard light/medium but doesn't include the...
OK. I found that when I press the clutch, a drop or two of fluid comes out of the rubber spout part of the boot on the slave cylinder. So, I'm moving forward with a replacement of both the clutch master cylinder and slave cylinder.
Does anyone have a recommendation on what and where to...
Ok. Thanks. This leak spot was after the cruiser sat for a couple of weeks. The fluid in my master cylinder reservoir has emptied and this is above the fresh wet spot on the card board I placed below the vehicle so I made the assumption. I’ll look further
After a few months the leak is getting worse. It looks like it’s coming from here. That’s neither the master nor slave cylinder. Does anyone know what gasket and where to find?
Ah. My copy of the Chassis-body FSM was incomplete. I found full copies.
But, my FJ60 is from April, 1984. So the 84-90 manual says October84 for a start year. Does that mean I need to refer to the 1980 manual? If there is another for early 1984 models, I haven't found it yet.
Thanks! My FJ60 was built in April, 1984. Am I reading correctly that the master cylinder changed in '85? Do you have a favorite vendor for the parts?
Also, does that mean my rig is not an easy candidate if/when I ever wanted to entertain an H55 swap?
Two days ago, I noticed my clutch pedal was pushing in much easier than normal, but my 60 went into gear and I was able to make a quick run to the store. Yesterday, I got back in and had shifting trouble. At first, I couldn't get it out of reverse until I released and pushed clutch back in...
Update: I removed manifolds, reset gaskets and reinstalled. Took care to slowly follow bolt tightening order. I used bolt and nut combo on the two bolts going up from the exhaust to the intake manifold that were threading into that soft, stripped aluminum of the intake. After all of that, my...