Installed new battery. Sometimes it starts other times it does nothing. If I shake the shifter it seams like it will start. Is it the starter or a switch.
I'm thinking about getting my cruiser painted. I have attached picture for reference to how many dimples my LC has. It started with a little hoof rust. I got a price for $1600 to do the following:
1.Cut and patch the roof with fiberglass
2. Pull the dents and use a thin late of bondo where...
I have a 2007 Highlander and the passanger window rolls up fine sometimes and others it stops and then takes several tries to get it to roll up. Each time i try to roll it up it wil go an inch or two.
I've been poking around due to trying to find multiple leaks. My question is when the sun roof is closed is it normal to be able to gently push up the front and back or should it not move? The front can be pushed up about 1/8" and the back about 1/4".
I have a 94 that has rusted through one of the roof rack mounts. I was thinking of cutting out the rusty section and then JB welding a piece of metal to the underneath. Then filling it with bondo and Rihno lining the top. I have two questions.
1 is it safe to cut with a dremal without removing...
Both my rear slider windows are leaking in the same spot. At the back of the window in the rubber where the glass slides. Please help with what needs to be replaced and if possible a part number. Thanks.
Can anyone use this radio before I throw it out. I also have this transfer case out of my 94. It needs to be rebuilt was not sure if anyone needed it or I should recycle it. If you want either just text me and I can bring to the next meeting. 760 522 0124. Rudy.
From the posts that I have read I think these are the rocker drains. They did not seam plugged or of an adequate size. I had a ton of water in there. Is it ok to keep the front plugs out?
I was in the process of replacing my window run an felt and the window was still not working properly. So I removed the door card and found these parts in the bottom of my door. I figured out the long piece is part of the window track. Does the black rubber piece go on the bottom of the window...
Just replaced my rear wiper motor and arm. When I bought my cruiser it did not have the rear wiper anymore. My question is when I turn off the switch is stops in the vertical position not the horizontal. Did I put in the inner arm backwards?Thanks
I searched and looked in the FQS post but could not find a how toon TB cleaning. Does one exist? If not Please giveme tips or sugestions. I'm going to be replacing my valce cover gasket and thought with 330K it's probabily time to be cleaned when I'm in there.
I have a 94 and my dash lights are blowing the fuse. It happened yesterday on the way to work. Read a bunch of threads on the subject. Got home looked at the tail lights that I just tinkered with. Didnt see anything. Put new fuse in all was well. Driving to work this am and again no dash lights...
Please help identify the two tubes in the pictures. They are located on both sides in the rear quarter panels. On the drivers side I saw another tube that goes up. I'm assuming that is the rear washer tube. Also there is a black box on the that I believe is for the trailer lights. Is that correct?
I will be doing the valve cover gasket soon and would like to get a replacement cover to make the job go quicker and clean up the cover. My question is what year covers are interchangeable?