Well does anyone know if there is a way to re-wire the connector from a 76 (2 wire like in post 2) to work with a later 3 wire set up like is shown in post #3. Back in December I bought a supposed 76 wiper motor off flea bay. Well this afternoon I went to install. Blew fuse instantly. There's...
Pulled mine off this AM. Did not remove radiator. Did not remove air pump. Did not remove alternator. You do have to loosen the alternator bracket where it bolts to alternator and obviously the 2 bolts/ nuts that hold both the alternator bracket and the water pump. I loosened both the clamps...
Well, the Dobinsons were on a 60 that I picked up last year and moved along to shmuktster for a part out. I kept springs and greasy shackles. Dobinson just getting a USA presence started down in Florida. I ordered up their shocks, bushings and some new arb u-bolts. Tires b 33s right now. She...
It was upwards of a 2 day battle (dam spring pins) but my eldest seems happy with her Xmas present. The lift is Dobinsons 7 leaf springs all round. I initially put in some castor correction shims...death wobble arrived at 40 mph. Scratched head....removed shims...no more death wobble. I am...
No, he basically dropped the engine, trans, transfer from an 84 FJ60 in it before I purchased it. It rolled onto a transporter and when I got it I finished it up. Wiring, line linkages, drive shaft etc....
I do miss my old pig, but it was a choice I made.
I just got an email from Brian (pigwalds keeper). Doubt if I'll get in the hunt at this point. Still have boat and staring at a winter haul,scrub, block and launch bill. All I can say is salt air is indeed insidious. Pablo, technically the split case was done by Rhino. He put it and the 2f in...
All things are to be considered at this point including distributor and coil/ignitor. So far I haven't had a chance to get back to it. Only new info is that after it died in the driveway again, I let it sit for 2-2.5 hours went back out, turned the key and it restarted. So, it is a rather...
Paging Dr. Held...
Well I was all fat stupid and happy finding the "cause of my problem was the fried diode D105". That was until Friday on my way home from work. Turned a corner shudder and died. No restart. CEL illuminated when ign was turned to the on position, so I figured the D105 issue...