Search results for query: *

  • Users: NCLX450
  • Content: Threads
  • Order by date

Forum search Google search

  1. NCLX450

    Key Code Question

    I have been to two dealers with my proof of ownership and they will not provide me the key code. They told me they can cut a key and program everything for me if I purchase from them, but that Toyota doesn’t allow them to give out the code to owners? Any suggestions before pulling the lock...
  2. NCLX450

    97 LX450 Transmission issue

    Will only shift to Park, reverse and Drive with only 2nd gear. Seems like a shift solenoid, pressure switch or something electrical based on the fact of what works. Never had an issue with it before and fluid stays clean and at the correct level. Any suggestions? Thank you!!!
  3. NCLX450

    Questions on wheel offset

    I have a 2006 Tacoma I’m looking to add 18” limited wheels with 275 AT2 tires on it. Looks like these are 18mm offset from the factory. Would the stick out enough to clear the control arms? I have 265’s on it now with stock wheels and a 1” spacer lift. It just barely clears the control arms...
  4. NCLX450

    Tire fitment question on 2014 GX460

    I have combed through the search function for the forum and everywhere it seems concerning the fitment of 275-65-18 Michelin LTX AT2's. I haven't been able to confirm if that exact tire will have any rubbing issues on Stock rims? Seems most threads deal with other tires (KO2, Cooper, etc)...
  5. NCLX450

    97 LX450 alternator charge question

    I had the battery and alternator checked, battery is good. Alternator charge shows 13.9 at idle with or without the AC on. Here is what is weird, with the fan on high the charge goes to 13.0-13.1 and the lights and fan speed up change with throttle. Now, if I turn the AC on (even with the fan...
  6. NCLX450

    P0031 and 02 sensor

    My code reader says P0031 and my CEL, VSC and TC lights are on. I have reset it several times and checked the gas cap. I would assume the P0031 to be the Bank 1 (in front of CAT) sensor. I just replaced this about a year ago. So, do I just replaced both front ones at the same time or just...
  7. NCLX450

    O Ring oil for AC expansion valve

    I am replacing my Evap core and expansion valve on my AC. What oil do I coat the new expansion valve O rings with? Thanks
  8. NCLX450

    CSF 2517 question

    Anyone have the file the sides down a little for this to fit? I just got a new one and the front lower corners are a tad long to fit. The bottom round part needs to be trimmed a little on both sides. Just curious in case I need to return it. Thanks
  9. NCLX450

    Radiator foam

    I have some leftover camper top foam. If I stacked it up to correct thickness can this be used for the radiator gaps? Just trying to find a use for it instead of buying more foam lol. Would it melt? Thanks
  10. NCLX450

    New Koyo A1918 leaking

    I just installed this 2 weeks ago and now it's leaking around the top where the plastic and aluminum meet. Anyone else have the same luck with the KOYO radiator? Funds wouldn't allow the factory OEM so I tried to stick with a KOYO as the next best thing. Looks like I get to don't all over again.
  11. NCLX450

    ES300 seats in a LX450/FJ80?

    Anyone know if these seats will fit in a LX450? I found some in good shape and the color matches the tan interior pretty well. Plus, they're comfy. The stock side bolsters and seat backs are killing my back in my LX450. Plus they're ripped up so I would rather not cover them again. I'm...
  12. NCLX450

    Fan removal question

    Are the 4 nuts (12mm) holding the fan on reverse thread? Do I loosen them counter clockwise or clockwise? I'm removing my radiator and I'm not having any luck getting them loose. Is there a trick to keeping it still without hold the belt? I tried to leave it on and push the shroud back but...
  13. NCLX450

    FJ cruiser seat?

    Do these seats fit in the fj80? If so, is it an easy swap?
  14. NCLX450

    Radiator top O Ring

    Anyone replaced the factory top O Ring and have directions? I have a leak that goes around the entire top of the radiator where the O ring would be. I was planning to purchase an entire new Radiator but after thinking about it I was wondering if it would be better just to do the I ring. Thoughts?
  15. NCLX450

    Murray Radiator's?

    Anyone have experience with these? I was looking at the Koyorad and the TYC 1918 but I have a friend locally who can do the install for me easily. They all seem to be a 2-4 year radiator, so yes they're cheap but I'm broke and need the old girl on the road. The O'Reilly Radiator would make it...
  16. NCLX450

    Shock question/favor on OME

    I recently picked up a used OME 2.5 lift and I'm not sure on the shock condition. The previous owner (IH8mud member) assured me the shocks and springs rode well. The shocks seem awful soft and easy to push in by hand. Can someone much smarter than me look at them and tell me they aren't worn...
  17. NCLX450

    12v power source for rear camera

    I wired my new radio with camera and I need to find a power source for the red and black wire for the camera. The reverse wire is connected to the reverse lights and works fine. Now I need for the camera feed to come alive. Any easy wire to tap into with the red and black wires at the back of...
  18. NCLX450

    Good aftermarket radiator for 97 LX450?

    Let me go ahead and start this off by saying that I clearly know the OEM is superior.....that being said it is not an option for me right now. I literally just got it back this week with a fresh paint job and body work, so I'm flat broke. I smelled the the sweet smell and opened the hood to...
  19. NCLX450

    75w90 vs 80w90 in TC

    From the search it looks like the majority of folks use 75w90 M1 in the TC. I’m running Lucas HD gear oil 80w90 (Dino) in both my axles and have extra around. Is there any advantages or disadvantages by using 80w90 Lucas HD gear oil (Dino) in the TC? I know it’s not expensive to just buy...
  20. NCLX450

    Help identifying sound from 4wd

    In high range (normal operation) I get a squeal/Shimmy/shake in the drive train while in reverse only. It’s as if it slips a little bit then engages. I have read in the searches that some slippage is fairly common in reverse from time to time but the sound concerns me. It feels like it’s...
Back
Top Bottom