Search results for query: *

  • Users: Rusty
  • Content: Threads
  • Order by date

Forum search Google search

  1. R

    Speedo Cable for H55F Split T-Case

    I did a quick search in the 40 section for an answer but I can't find one... I'm doing a 2UZ/H55F conversion in my 72 FJ40. I've bought a 60 series split t-case for it (and managed to find the parking brake conversion kit for the t-case). In any event my original gauge cluster is in rough...
  2. R

    36mm Bore Hydraulic Release Bearing - Anyone Know of One?

    I'm in the final stages of gathering up the parts to do my '02 Tundra 2UZFE V8 swap into my '72 FJ40. I've got the entire drive line that I'm going to use together now, new H55F, Dellow conversion bell housing, split t-case with park brake conversion kit and a rear full float out of an FJ45...
  3. R

    Cool OEM Work Light Switch

    Okay, I'm not an FJ guy, don't own one, but while looking for fog light switches to match my 80 series interior I came across this, which seems to be OEM fit for the FJ/Taco style dash switches: Figured someone might be interested in using this for an external work light project. Never...
  4. R

    TJM 4" Lift Install

    I've finally installed a 4" lift in my '97 LX450. I called up Extreme Land Cruiser and ordered up a set of TJM 4" springs, shocks, panhard rods, Ironman caster correction plates, and other goodies at Ryan's advice (parts I knew I needed anyway, sway bar drop blocks etc.). I started installing...
  5. R

    Ironman Caster Correction Plates-WTF?

    Okay, I can't be the only one who's come across this, I can't find anyone who has posted with this before though. :hhmm: I've got a set of Ironman caster correction plates with my 4" lift and the driver's side went relatively smoothly, a little fighting the suspension to get the bolts in, but...
  6. R

    Lift kit problem - brake line missing - need help!

    Hopefully someone can help me out with this one... A few weeks ago I ordered a lift kit from Extreme Land Cruiser, most of the parts arrived last week. Some of the parts they use to put kits together come from Man-a-Fre which I received today. Unfortunately some parts are missing, rear bump...
  7. R

    Fibreglass roof panel cross-compatibility?

    I've searched but couldn't find the answer specifically, I'm sure it's already out there, maybe used the wrong search terms... anyway. Are all the fiberglass roof panels the same for all model years? My roof panel is cracked in places and it is also in need of filling to get rid of sun damage...
  8. R

    Wanted  60 Series Parts

    I'm looking for the following out of a 60 Series for my 40 series "resto-vation": - Late model 60 series t-case in good shape to suit an H55F install, must have provision for 5th gear oiler. No vacuum shift. Model years 84-87 are correct I believe. It would be fantastic to find one that has...
  9. R

    Parking Brake Blues

    I need help finding a solution to my H55F split t-case installation problem... I've hit a major glitch, as others have I suspect, in getting a working park brake. My Cruiser is a US import and I'm going to need to have a working parking/emergency brake if it's to pass a vehicle inspection...
  10. R

    H55F - Which Split T-Case?

    I'm about to do a 2UZ-FE swap into my '72 40 and I've got most of the parts lined up, motor, bell housing and clutch assembly to mate it to an H55F, but I'm not sure of which model t-case to get. I know it has to be a 19 spline, but from what I've read not all 19 spline split t-cases work. Do...
  11. R

    100 Series 2UZ-FE Rear Oil Sump?

    I've bought a 2UZ to swap into my '72 FJ40, the motor came from a donor '02 Tundra with 47,000 miles on the clock. In any case I'd heard that the 100 series had a rear sump oil pan; the Tundra motor that I have has a front sump oil pan and may have clearance issues to the front axle (though...
  12. R

    1HD-T

    I'm thinking of swapping a 1HD-T into my '72 Cruiser. Anyone know how difficult the 1HD-T is to install? Is it ECU controlled or is it fairly self sufficient? The donor motor is coming out of an 80 series equipped with an auto. I'd like to bolt it up to an H55F, does the motor bolt up to...
  13. R

    2UZ-FE swap with manual tranny... thoughts?

    I know many have inquired, and threads are out there on this topic, but I can't seem to get concrete answers on the line of thought I have on tackling this project... I'm sure there are enough Toyota technically inclined members here on 'Mud to help me figure this out... The F engine in my '71...
  14. R

    Rodent with expensive taste...

    I couldn't figure out why my rear washer wasn't working, I thought that my recently replaced diverter valve had failed prematurely. As it turns out the line to the rear washer got chewed through by a rodent right at the firewall. Several connectors near the master cylinder were devoured along...
  15. R

    OBDII diagnostic data and PLX DM-100 any thoughts?

    I posted a thread earlier about installing aftermarket gauges. I wasn't sure which gauges to get, and I haven't completely figured it out yet, but I think that the PLX DM-100 OBD gauge is going to be one of them. For those not familiar it has the capability of displaying OBD data live. This...
  16. R

    Best Gauges to Match Interior? Pyro Range?

    I've been looking to buy a pair of gauges, pyrometer and boost, as part of my S/C install. Since there isn't a gauge pod available that fits the LHD 80 series I've settled on the 94-01 Acura dual pod by Autometer as others here on 'Mud have decided to go with. My only dilemma now is selecting...
  17. R

    Gauge Pod

    I'm just in the process of getting the bits together for my S/C install and I was thinking of installing a pyrometer and boost gauge. I found Boydmick's great post on modifying and installing the Acura Integra Autometer 2 gauge tan pod, but that part number (ATM-20112) is now toast, it's no...
  18. R

    Head Gasket Before Supercharger?

    I've just bought the TRD supercharger for my '97 LX450, I decided that I wanted one after figuring that I might want to tow a lightweight travel trailer one day in addition to hauling around the additional weight that mods bring (bumpers etc.). I'm seeking the advice of those who have added the...
  19. R

    Just found this LX...

    No affiliation, just found this on Craigslist while browsing for cruiser gear, if anyone is looking for one in the PNW, Washington State. One month old ad, it could be gone but you never know. It looks clean, 133K '96 LX, no lockers, all records... Lexus LX450
  20. R

    Slee 4" Kit DIY Parts

    I'm looking at the 4" Slee lift... well I've decided on it actually, but I was wondering if it's worth buying the bolt in kit over the DIY kit for component strength reasons. More clearly put, are the completed Slee bolt on adjustable panhard rods better than the OEM Toyota rods with their...
Back
Top Bottom