i need some help pls
i fitting a 2017 f250 sd hydro unit with MC to my 80. i made over lines from pump to run directly to hydro unit and then output of hydro unit goes to steering box ( top bolt) and low pressure of hydro and steering box (bolt to the side of the box) both T up and return to...
folks,1hdt problem. spill valve was leaking through the top. changed it to a generic spill valve. van worked fine for 30 mins then refuses to past 2000rpm. it acts as if it get a fuel cut then comes back at under 1000rpm then if i floor it again, it cuts at 2000 rpm and get back response at...
Folks, anyone has one for sale or to lend?
would this work?
https://www.aliexpress.com/item/33042977330.html?spm=a2g0o.seodetail.topbuy.1.3d8a62c3wtT17q
I have a leaking front diff oil through axles seal problem that 4 pairs of new seals have not resolved. mech has advised that the axles are looking a little worn around the point where seal sits.. weird that a rubber will wear axle..
so i am looking for replacement axles for my 1991 HDJ81 and i...
hey guys,
I am getting a buzzing noise from this relay when i try to use the system. no water comes out of sprayer as i am not hearing the motor enguage.
Guys I am having and annoying problem
The engine shakes alot in drive or reverse at a stop when warmed up.
I have changed all external seals on the pump, pumped primer pump whilst engine was shaking. If I drive off, engine shake goes away. If I hold 900 rpm with ac on, it settles down a bit. It...
Gents,
I recently bought this gem and both side mirrors dont move with switch how they are supposed to as well as they don't retract all the way and one side sticks whilst the motor screams away.
I have been looking through ebay and can only find replacements with 3 pins, however mine has def...
Good day,
I recently purchased an 80 series 1991 and it came with front and rear wiper arms with with the screw on type blades. are there any conversion kits to make it universal as with modern arms?
Guys, new to the cruiser world and i bought one with a horrible shake on idle in any gear. whislt digging around in engine bay to resolve, i saw my injector pump is leaking where the injector lines leave the pump. all lines are tight and it "seems" to be coming from behind the plate where the...
Guys,
After having read losts of threads, I did not find an answer..
Does the JDM 80 Series with a 4.2 TD differ from the USDM spec 80 series, purely on a swap to ls2 parts list ect
What are the actual parts one would need to gather for swap
Which ls2 engine and what yr - gto 2007...