Search results for query: *

  • Users: Tbone81
  • Content: Threads
  • Order by date

Forum search Google search

  1. Tbone81

    Engine Noise Issue 2019 LC

    This is my sister's land cruiser. 46,000 miles 2019. She has had issues with engine noise for two months and it was at the local Toyota dealer for one month. The valve cover was removed on the driver's side for inspection of the valve train with no issues supposedly found. Please help as the...
  2. Tbone81

    Ignition Coil install screw torque

    Can someone provide me the torque from the FSM for the screw that retains the ignition coil? I don’t have my computer with the fsm download and cannot find in search. Trying to button up everything this evening. Thanks 2000 LX to f it matters.
  3. Tbone81

    Mechanic near Gulfport MS or Mobile AL

    I have a friend who had a heater tee go out and may have overheated the engine on 06 LC. Looking for a good mechanic in his area to go through the truck and make sure everything is ok. Any suggestions for where to take it? Looking for mechanic near ocean springs MS that works on Toyota.
  4. Tbone81

    Need Help - PCV grommet pieces feel in valve cover and cannot see them.

    I had two pieces of grommet fall into valve cover. While trying to retrieve they got pushed down into hole and cannot see them now. What are my options? I am guessing I am going to have to pull valve cover off but before I do, does anyone have a suggestion?
  5. Tbone81

    Misfire codes - question about checking Timing

    This weekend my 2000 LX with 150k miles started running rough under light acceleration and the CEL started flashing only under acceleration. The first code was only P0306. I parked it and caught a ride to the soccer game with a friend. 12 hours later I went to pick it up. I cleared the codes...
  6. Tbone81

    Help with alignment after lift

    I had an Ironman 2” lift installed and 285/75/16 Toyo open country RT put on. The tire installer is having trouble getting alignment to spec. The lift was installed and leveled the front. Could we have pushed the front up too far? If I lower the front some could that help get the caster back in...
  7. Tbone81

    Recent Purchase looking for mechanic in Madison/Athens/Decatur Area

    I recently bought a 2000 LX470 with 143K miles. It was a local truck and the first i have stubbled on with no rust. I am looking to get a few maintenance items and repairs addressed. I also have purchased a 2" Stage 2 Ironman lift with Foam Cell Pro Shocks that i want installed. Any...
  8. Tbone81

    Wanted  North Alabama or Central TN - 17” wheels for lx470

    Looking for Toyota factory 17x8 wheels for land cruiser or lx470. Thanks
  9. Tbone81

    Wanted  Wanted 100 Series in North Alabama/Central TN

    Looking for clean 100 series in north Alabama or central Tennessee. PM me if you have one for sale. Only interested in trucks without rust issues and no history of major accident damage.
  10. Tbone81

    Wanted  Huntsville, AL 2008-2014 land cruiser

    Looking for a low mileage land cruiser with service /maintenance history and no rust to be used as a daily driver.
  11. Tbone81

    Wanted  1fzfe

    looking for an engine for 97 lx450. Would prefer low mileage but not opposed to a high mileage with good compression for the right price. Thinking of building a replacement for mine and maybe adding a turbo. Don't want to pull mine until I have a replacement ready. Thanks
  12. Tbone81

    Timing chain cover oil leak - what else do I do when I fix this leak?

    I know this will resolve my concern of doing the head gasket but what else should I address while I have this area open. And yes i have done the distributor o ring and oil pump cover gasket. I hate leaks. But this one will have to just leak until I save up some money. Not sure I can get this...
  13. Tbone81

    Wanted  FZJ80 95-97 Jackson MS

    Looking for a stock 80 with less than 200k miles in Jackson MS. Lockers are not necessary just well maintained and everything working. I am shopping for my dad who loves my LX. It will be a daily driver so maintenance and reliability are necessary.
  14. Tbone81

    Huntsville Area FZJ80 mechanic

    does anyone have a mechanic they recommend in the Decatur/Huntsville area? I have a leak around my oil pump that is getting worse. Not sure I want to break into that repair. May have rear arch or main seal leak attacked at the same time.
  15. Tbone81

    Oil leak near oil pump please help on what parts are needed

    ther looks to be a leak between the power steering pump and oil pump can someone tell me what parts I need to fix this? I have new seal and screws for oil pump cover and new pressure relief valve components. But it looks like the leak is behind that area. I cleaned the area and drove the truck...
  16. Tbone81

    Seat extension install issue please help

    I cannot get the rails off. Is there a trick not in the instructions? I am trying to follow the instructions on wits end website. I have the front feet off and the bolt on the back of the rails but the rollers seem to be hanging up and will not let the lower rail come off the seat. Please...
  17. Tbone81

    Wanted  Battery box 91 or 92 fj80

    Looking for battery box and hardware for passenger side
  18. Tbone81

    For Sale  Tan trim pieces lx450 fzj80

    I have a few extra trim pieces in tan from my purchase in February. Felt pillar covers, window trim pieces, rear hatch seal, and rear carpet(has some stains. I have extra carpet backing that I can provide for the carpet. I am moving in a month and need to get them out of garage. If someone...
  19. Tbone81

    Wanted  LX450 Rear Swing Out Bumper and Sliders

    Before I buy new or build a rear swing out bumper and sliders for a LX450 I figured I would give it a try on the wanted market. Please PM me if you have something for sale. I would rather find something local but I am willing to pay for shipping for the right items. Thanks in advance.
  20. Tbone81

    Rear Bumper and Slider Build

    I am looking to have sliders and rear bumper built locally since my budget does not allow for a purchase from vendor along with the shipping costs. I am no fabricator nor do I have access to the tools to complete a build. I would be willing to put my engineering skills to work but would like...
Back
Top Bottom