Search results for query: *

Forum search Google search

  1. cjonezy

    2F Oil Pump on 1F Engine

    Do they sell a piece of tubing to get from point A to point B or is this something we will have to fabricate from the existing piece?
  2. cjonezy

    2F Oil Pump on 1F Engine

    He is stating the problem is the pick-up tube from the oil pump to the block.
  3. cjonezy

    2F Oil Pump on 1F Engine

    Can someone post a picture of how they rerouted the oil pickup line when doing the 2F Oil Pump swap on a 1F engine? Trying to help out another mudder who is without a computer at the moment.
  4. cjonezy

    Intake Manifold Bolt Question

    The posted picture has the bolt screwed all the way down into the exhaust manifold. It almost seems like the bolt is too long, or something is missing.
  5. cjonezy

    Intake Manifold Bolt Question

    Am I missing a spacer or something? I didn't take good enough pictures prior to disassembly.
  6. cjonezy

    Camshaft Concern

    Thanks Steamer. Now I am starting to see why people just convert to LS1.
  7. cjonezy

    Camshaft Concern

    Any idea where I can source the camshaft retainer and C-Clip? Also, was the retainer originally flat? If so, maybe I can machine one.
  8. cjonezy

    Camshaft Concern

    I checked with Delta Cam and they don't have a solution for me. Any other MUD options?
  9. cjonezy

    Cracked Exhaust Manifold

    The cracks were ground out with a de burring tool. Each area ground out was roughly 1-1/2" wide x 1/8" deep. (Enough to remove all of the crackl QUOTE="1MOA, post: 13727624, member: 135813"] did you drill the cracks before welding them.
  10. cjonezy

    Cracked Exhaust Manifold

    It's a 60% copper 40% zinc alloy. I can find out the exact material tomorrow for you.
  11. cjonezy

    Cracked Exhaust Manifold

    Well, I got the cracks ground out and filled up.
  12. cjonezy

    Camshaft Concern

    This thing is worse than a boat! Break Out Another Thousand I'm going to order all the parts and get it done. Looks like I'll be doing lots of research.
  13. cjonezy

    Camshaft Concern

    Would it be impossible to weld these cracks?
  14. cjonezy

    Camshaft Concern

    Ok. I will call Summit tomorrow and see if they can give me an answer as to which bearing is drilled. I have the 1F engine as you stated.
  15. cjonezy

    Camshaft Concern

    Ok. I will order the Melling MC803 camshaft. Is this an exact replacement? Is there anything else I might need other than a new side cover gasket and C-Clip for the gear?
  16. cjonezy

    Camshaft Concern

    Bummer. I just put the oil pan and side covers on with new gaskets. I might have to find an engine builder who can help me. This is above my pay grade.
  17. cjonezy

    Camshaft Concern

    Can the camshaft be replaced without totally disassembling the engine? It is currently on an engine stand.
  18. cjonezy

    Camshaft Concern

    Should I be concerned with this cracking? Also is there supposed to be a C-Clip or something? I was driving this before I pulled the motor.
  19. cjonezy

    Spindle/Bushing Help

    I ended up buying this little honing tool at harbor freight and went after it til it fit.
  20. cjonezy

    Cracked Exhaust Manifold

    Original carb. I am wondering if I cracked it when I was trying to drive out the flapper pin.
Back
Top Bottom