1981 BJ41 24v volt system
With the rear tail lights removed, should the front turn signals still operate when engaged?
My parking lights will come on, but the turn signals will not blink.
I'm 6000 miles away from the rig currently, so of anyone knows if you need the rear lights installed to...
$58,000 OBO
I'm posting this for my friend of 40+ years. We both reside in Oahu Hawaii and I have personally driven this Defender. She is incredibly tight, well restored, and mechanically sound. As expected, she is about as quick as a box of hammers rolling up a hill. Other than some...
Brand new battery trays. I bought 2 to fit my 24V 1980 BJ41, but opted on keeping the original setup as they weren't as rusted as suspected.
$32 new each...selling for $20 shipped each. Thanks!
Here's where I bought them: Battery Tray Kit - FJ40, FJ45 1958-1978
Brand new. Please confirm it will fit your rig before buying. This came with a box of spares when I picked up my cruiser. Never installed.
$15 shipped or best offer.
Thanks!
Besides the compressor and control unit in the cabin, is there any reason that the remaining parts of a factory AC system from a RHD diesel 24v truck wouldn't work in a 12v RHD diesel?
I have everything from a 24v BJ41 and would like to use it in a 12v BJ42.
Thanks!
1982 BJ42 LX (AU spec)
The rig is missing the vacuum reservoir on the frame. It recently had a new MC installed and the braking is great.
Is it a big deal if this part is missing? Thanks!
1980 BJ41
2B
1. Does the black raised "ring" on the gasket go face down or face up in the lower thermostat housing?
2. Should the hole in the thermostat be positioned at dead center between the rear 2 mounting holes or at 1 or 2 O'clock? I see that for the 80 guys it should be at 12...but not...
I have an outside hose that is plumbed into the hot water heater in the house.
Is there any reason that I shouldn't use hot water to back flush the cooling system?
The engine will be cool (ambient air temp (75-80F). The household water temp is about 120F. I can't see thermal shock being an...
I'm looking for a transport of a Meteltech rear bumper from Newburg Oregon to New England (Mass...but I can meet in NY, CT)
The bumper would be picked up at their shop broken down and packed on a pallet.
Pay job of course. Thanks!
Dimensions:
Shipping info:
67 x 44 x 36 250 lbs.
2700 E...
1980 BJ41
2 battery / 24v system
Battery dimensions 8H x 7W x 10L (inches)
I've read every battery thread and I'm a bit over-saturated with info. I'm not winching, nor am I running extensive accessories. That said, cold weather performance is my main concern.
My goal is to find a quality...
1980 BJ41
For the brake/run tail light bulb (middle bulb in the assembly) I'm showing that some rigs used a 21w/5w dual filament bulb and some used a 25/w/10w dual filament bulb.
Is there any risk to damaging the terminals of the bulb socket by using the higher wattage bulb?
Can anyone...
I purchased the wrong size for my BJ41 oil pan. This will fit the gas land cruisers. Brand New and never installed. Solid brass, new gasket, and makes oil changes a snap. No more weeping drain plugs or hot oil on your hands.
$20 shipped.
Diameter: 25 mm
Thread Pitch: 1.5
Gasket: 25 mm
Nipple...
Brand new Fumoto F104N oil drain valve. I only test fit it without the gasket. I opted for the version without the nipple. Say goodbye to weeping oil pans bolts and hot oil on your hands!
$20 shipped.
Diameter: 18 mm
Thread Pitch: 1.5
Gasket: 18 mm
Nipple Dimension: 3/8" - 10 mm
Nipple...
1980 BJ41 (The water temperature sending unit is the same for the diesel and petrol rigs)
Does anyone have a part number for the rubber o-ring that sits at the base of the water temperature sending unit?
I can't find it anywhere in the parts books and the new one does not come with it.
Toyota...
Rig: 1980 BJ41, 24V.
I have a 24V Battery Tender that I am going to hook up today.
This one: 022-0158-1
The tender has 1 positive and 1 negative alligator clip lead.
Would someone be kind enough to tell me which battery terminals I should connect the tender to on my 2 12V batteries?
I'm...
I have a Funmoto engine oil drain valve for the gas engine FJ40's. I ordered this by mistake as I have a 2B and the oil pan drain plug size is different.
This is part # FG5N. Thread size = 25mm with a 1.5 thread pitch. Made in Japan. Brand new and never mounted (The 2B pan is 18mm so I didn't...
Long story short, I was shipped what were believed to be 24V front directionals (entire left and right housings/bulbs) for my 1980 BJ41.
After being wired up, the parking lights illuminated, but the turn signals would not and a clicking noise at the steering column was audible when applying...
The rig isn't currently with me and I'm trying to decipher the production month by my frame/vin number.
I checked out the vin decoding links after doing a search on here, but they don't seem to apply to the BJ41's.
Can anyone pull the production month from this ID number? :BJ41010975
Many...
We have a case of this at the shop that a customer never picked up. It's mine for cheap if I want it, but I'm hesitant to put it in the 4 speed transmission case of the 1980 BJ41.
RP says it's GL4 and GL5 compatible. Some research online (Gadzooks!...It must be true!) suggests that multi...