What is the fitting size of the input & output ports on FJ80 power steering box? I have one out and want to put plugs in it so doesn't drip fluid or get debris in while working on cleaning up exterior.
Guessing AN12?
Cheers, Allen
Was curious whether a set of 4 bolt high steer arms will fit on TG Six Shooter Knuckles? Trying to figure out where the added width is on Six Shooter knuckles, are they deeper towards the center or is the width on the outside of knuckle?
Would stock width tie rods still fit or need to be...
I have an old pair of FJ60 vented rotors here somewhere but can’t find the silly things to measure them. :-/
So have to ask, what’s the diameter & width of FJ60/4Runner rotors?
Cheers, Allen
Not looking for exact prices, but any idea roughly what a 93-97 FJ80 rear 3rd member case without gears, just good empty housing go for?
Will be building 3rd member with new R&P bearings & air locker, so will just need housing.
Wondering what to expect price wise, just general idea.
Cheers, Allen
I’m looking for couple sets/pairs (ie. 2 left & 2 right) OEM 86’-94’ V6 mini truck/4Runner calipers in good condition.
Doing a 4 wheel disc brake build and looking for couple pair of calipers that I’ll rebuild.
Will need them put in flat rate box & mailed.
I don’t need to get both pair/set...
What are the casting numbers and any other identifing marks for the 86’-94’ 4 big piston V6 Toyota OEM pistons?
I’m looking for some cores to rebuild, but want to be sure to get OEM castings.
Looking for 2 sets of cores in good rebuildable shape if anyone has some.
Cheers, Allen
Looking for 2 sets of good condition FJ60/62 front axle hubs, the ones that go on the spindle, not the free wheel hubs.
Will buy each set separately, don't expect to get 2 sets from same person.
Would need them put in flat rate box and mailed to me, of course I pay for the postage. :-)...
Is there a best or one of the best OEM rebuilt FJ60 & V6 mini truck calipers?
I’m going to need a set of FJ60 calipers for the front & V6 mini truck calipers, for my 69’ Series IIA 100” build with modified FJ60 axles & diffs.
Is there any benefit to new calipers compared to the best rebuilt...
I'm building a 69' Series IIA 100" Land Rover and using a FJ80 steering box.
If I decide to upgrade to a 100 Series sector shaft and a Series 100 pitman arm doesn't have the correct drop and the FJ60/80 pitman arms won't fit on the shaft but can get one with the correct drop.
Question is, can...
i hate to have to ask this as I’m sure it’s out there & im not finding it now that I’m looking.
What OEM steel rims are there in 16x 6 or 6.5 wide? Regular style steel rims not wagon wheel style.
Something that would be usual in the U.S.
Cheers, Allen
Ok I started working on this a good while ago and started a thread but it’s been so long, thought I’d start fresh now that I’m moving forward.
I’ll brake it into two posts, one about the background & second about the process. Still probably going to be a bit long threads & have quite a few...
What is a primer to prevent steel from rusting for a while, that would be reasonably easy to remove with stripper disc/flap disc a few months later?
I need to prime the frame, but a few months later need to take it down to bare steel for final coating.
Also that will stick to itself when...
After spending a bit of time cleaning one of the diffs I'll be using for my build, I noticed a bit of a problem...
Can this be fixed or is the case toast?
If I lived on the mainland it wouldn't be a big deal, I'd just get a replacement.
But being on the Big Island and their scarce here &...
I need a set of FJ60/62 hubs in nice condition.
Flat rate box to 96704.
I guess I should specify wheel hubs not locking/freewheel hubs.
Didn't think of that.
Cheers, Allen
I need a set of FJ60/62 knuckle balls in good condition, ie.. not rusted or pitted.
Just need to recipsaw the housing a couple inches inside the knuckle ball flange in the housing.
Don't need the bit of housing taken off the knuckle balls, I'll machine that off.
Stick em in a flat rate box &...
My understanding was that the Ruff Stuff FJ40/60 Diff Cut Spring Perch could be used on a spring under when the diff is close to the frame when spring under.
I talked to one of the guys at RS today and he thought that was the case, but the more I look trying to find someone that used one on a...
Are there a year range that the mini-truck knuckle balls, spindles & hubs are the same as FJ60/62?
Where I live FJ60/62 are few & far between, but there are lots of mini-truck of all years around.
If they are the same in a certain year range it will make getting some a lot easier.
Cheers, Allen
Are there are any real world benefits of using Chromoly hubs & spindles over OEM ones?
I haven't read about OEM hubs or spindles failing only the studs shearing other than on factory FF rears.
I'm using Ruff Stuff FF/Disc flange on rear axle that uses front spindles & hubs with RCV 30 spline...
Does the 7/88 & later 3B 2 have the same reinforcements (thicker rib castings) like the 14B?
I know the 3B 2 got roller lifters and the side cover was eliminated like the 14B and has the same exhaust mount hole pattern and different head than the 3B. But wondering if the block has the same...