Any thoughts on these?
I found some stuff on Pirate but not much over here.
Looking for real world experience not "ARB" only " comments:flipoff2:
Anyway here it is
Search | Marlin Crawler, Inc.
Got all new parts, tensioner is fine, chain is fine, guides are new before anybody ask.
Here is my issue
I get my engine timed (the chain) I do what I am suppose to do, nudge the cam gear clockwise just a hair , slide the cam gear on, retard the gear so the tensioner will come out so the...
Turns out for years I have been running a pickup coil that wasnt for my 84 dizzy, I am mystified how it even fired let alone ran cause it only had a minescule of the star contacting the pick-up contact.
Got that solved now I noticed somehow the star has got pushed down somehow by just sheer...
3 k and its yours, just gotta finish getting my dizzy in and whats left of the timing job. This thing is worth much more than that and I have twice that much in it, really no rust at all...........pictures later/
Trades?
in a 22re? A guys truck I know hurls black smoke anytime, unplug two injectors and it runs fine, thoughts?
I am about to check fuel pressure, the damper,reg. and the wiring to get an idea. He says its firing fine.
I know I have seen them ,I just dont know where. The crank to let the trailer up and down I have seen a wheel mounted on the end rather than just the pole(for a lack of a better term). Reason why I ask is in the back where I had planned to park the camper is real tight.....I mean tight because...
Make a long story short, my bracket that holds the idler pully (that bolts to the head) has always had a small bend (pushed in) on one side needless to say I have been eating pully bearings for some time.
Last time I used a tractor farm supply bearing and pressed the new one in.....only lasted...
Is the fuse powered before the relay or is the relay powered first then the heating circut fused?
Cause I found the the heating fuse behind the radio along with a relay but the relay I hear isnt that one its further up closer to the dash on the drivers/middle area.
The fuse in question...
A few mudders are going to RC on the weekend of the 18'th
If a enough shows up I would love to hold a meeting.
So far its the NEw York bunch that are going and we are welcome.
Being a few of us missed fall crawl I figured it would be a good time to re-group.
yes we are staying at RC and...
I have an 84 4 runner with the old 5 speed
I have been through 25 seals including the ones from toyota............none fit
I need it for the rear output of the tranny where the transfer mounts to the tranny(currently where the marlin box bolts up).
I have a set of numbers off the OE...
It happends sometimes but on certain threads I will go to post but where you are suppose to post is black. Refreshing or logging off and back on doesnt help.
dont have to be wheeling............just a night of heavy drinking,swapping stories and wrenching if anybody wants to.................thought?
No pressure............just putting it out there.
My seal failed between the marlin box and the transfer case this weekend and yes at one point I thought it was near dry so I make a bypass hose from the transfer to reduction box with great sucess but now I have a rattle when I am at high speed when I let off the gas. It pulls great still but...