Search results for query: *

  • Users: cody c
  • Content: Threads
  • Order by date

Forum search Google search

  1. cody c

    MUDShip  Need Council Bluffs IA to Montana (North end preferable) or Calgary (will more than cover your fuel and time to load/unload)

    Delete thread
    • cody c
    • Thread
    • council bluffs haul montana
    • Replies: 0
    • Forum: MUDship
  2. cody c

    CDL schematic for 92?? please?

    My CDL isn't working, and hasn't for some time. I have two manuals (pdf) one is for a 92 and the other for a 96, neither have the electrical schematic for that switch. I'd like to chase the issue down today while I have my cruiser in the bay at the office. The 92 manual I have shows a 2wd/4wd...
  3. cody c

    Looking for Shop to do some simple assembly work (put tires on a trailer, install license or vin plates) maybe some wiring

    Hey gents & ladies, I'm in Calgary Alberta, but the company I'm working for is wanting to import some trailers to sell to some telecom entity... Apparently we have a trailer coming there soon when my US counterpart gets there head out of their butt and some paperwork resolved. I don't know to...
  4. cody c

    hydraulic ram sway bar?

    Just curious, I'm looking at getting some sway bars together for the 80. Can i take a pair of hydraulic rams, one at each side, connect top of one to the bottom of the other, and same for other ports, and maybe a couple accumulators and make a hydraulic sway bar system? I could simply put a...
  5. cody c

    Help: 91-92 electrical EWD please

    Anyone got the electrical wiring diagram for the 91-92 series cruisers? I’d be happy with a couple pages for the transfer case and harness plug sheet that covers harness ID for the leads off the harness to the transfer case. I have the later model pdf’s, and 60 series but just need to fix some...
  6. cody c

    Wanted  looking for 42" x 17R or 20 tires, Irok, pitbull etc

    Hello, I have a set of 42-14-17R iroks, I should get a spare and maybe replace a couple tires but these things are pricey and now also hard to find. Im in Calgary but am planning to go to the Gambler 500 in June in Oregon. If you got a tire(s) that is at least good enough for a full size spare...
  7. cody c

    WVO system build questions (vehicle and centrifuge)

    Hello, With diesel prices in Calgary about $1.48 a litre, which is about $4.3 usd/gallon I think, WVO systems are getting sexy. My drive to work is 50km/day (30miles round trip) The office i am at now has a ton of yard space, empty(surplus) fuel tanks over 1000l and is pretty much indifferent...
  8. cody c

    What size material traction bar / pan hard??

    80 series, one tons, using the radius arms, extended/lowered the rear brackets for the arms, working on getting the pan hard bar built now. The factory piece is too short but close to usable, but was extended at some point (welded). Factory is about 1.25” solid bar. plan is to replicate that...
  9. cody c

    More complex of an Ackerman angle question

    I got the high steer and knuckles back for the SD D60 front axle. I’m wanting to start getting things setup for TRE’s gonna roll a wheel/tire in the garage and check arm clearance by throwing a brake rotor and unit bearing in the wheel and then drop the knuckle on it maybe later today. the...
  10. cody c

    For Sale  AA adapter, NV4500 to split case + parts

    In Calgary, Advanced adapter for the NV4500 trans to split case. I have the old output shaft if you want to pull yours and put this in instead of cutting. I think it has a small notch from cutting one of the bearings off or something, but it is in a thicker section of the shaft and wouldn’t...
  11. cody c

    Rear upper control arm bushing too big 92jf80?

    Is there any spec or variation on rear upper control arm bushings? It looks like the ones I pressed out were about 49.89mm and the control arm about the same, whereas new bushings seem about 50.3 or so. 0.4mm isn’t a lot till your trying to press it in, and I definitely don’t want to split the...
  12. cody c

    What master cylinder use? FJ80, SD D60 and 14 bolt axles

    92 Fj80 with a 6BT, am I best to go with the 1-1/16 T-100 master cylinder? What size is the stock one, what are the options and best options? I got a proportioning valve to add on, a new double flaring tool (titan) and I just cleaned up, powder coated and rebuilt the rear brake calipers which...
  13. cody c

    HF2A question for those who know it well (dissasembly)

    Can I take the front “nose cone” piece off, the one that surrounds the front output shaft without wrecking anything? Wanting to pull the output shaft out so I can knock out and relocate studs to run a 4runner double cardan shaft up front, don’t want to get into a whole rebuild, just pull the...
  14. cody c

    Anyone converted t-case center diff lock to lever?

    Just curious if anyone had converted CDL from dash switch to shifter? My scenario is a bit different, I have a part time case in it now I’m swapping out for a full time case, I’m unsure of the CDL system in place as it was modified at one time when it was a full time case with part time...
  15. cody c

    Center bore of front pinion flange vs rear flange diameter?

    Does anyone happen to know diameter of the bore on the front pinion flange vs rear on the 80 (where the driveshaft has a protrusion that sits in a pocket)? I have two different ones and need to figure out if I have things planned properly, my 80 is sitting out on the side street in like 12” of...
  16. cody c

    The one ton swap thread

    Edit: links below to portions of swap/build I swapped in one ton axles (complete, as any project goes), the cruiser already had the cummins motor in it. Previous build threads: Alternator swap with vac pump: Isuzu NPR alternator vacuum ports -...
  17. cody c

    Looking for dimensions 4runner disc rotors and calipers

    Hey guys, I have access to autoCAD through work for the next few days, and then I'm laid off without access. Trying to find dimensions for 4runner rotors, probably mid 90's, or whatevers handiest, as well as spacing/location for caliper bolts. Trying to get some parts built in CAD for one day...
  18. cody c

    92 gauge cluster, upgrade, pics of internal components. (diesel tach - adding egt and boost to factory cluster)

    So, there is a couple gauge threads running now, was on the fence to add to (sidetrack) or create a new thread. Went with new. Im gonna post some pics first of the factory components, and then get into what Im thinking for the modification in the next post(s) Note: the small scratch between...
  19. cody c

    Winter mitts (fur)... Cold weather gear...

    Im gonna show off some pics of a set of mitts I made. Perhaps some of you want to show your gear, post up your own. Pics first, then more text after if your interested.
  20. cody c

    Garmin Inreach, communicate your plan!

    This thread is to identify issues with using a communicator like Garmin InReach, to help identify proper planning prcedures and communicating with other parties. It is just a story of a recent trip, but should give you some ideas. (also posted on ex portal) I was headed off for a week of...
Back
Top Bottom