Search results for query: *

Forum search Google search

  1. pbreisch

    The ABCs of AHC - How to Measure, Flush, and Adjust all in one place

    finally got my rear height control sensor and slapped it in the truck. Set the adjustment bolt as close to center as I could eyeball and fired up tech stream. Here’s the numbers. I’ve cross leveled the front but looks like I will need to tighten down the TBars to get the front in spec but the...
  2. pbreisch

    The ABCs of AHC - How to Measure, Flush, and Adjust all in one place

    Ok, well, I think I might have found the problem. The rear height sensor was broken off it's mount. Must have either rusted through or been hit by some road debris. Time to order a new one and cross my fingers. Any opinion on OEM vs Aisin? Also, no matter what brand I pick it's going to be a...
  3. pbreisch

    The ABCs of AHC - How to Measure, Flush, and Adjust all in one place

    some differences in Height Control Sensor readings – not “near zero” but do not seem extreme – was the vehicle on a level surface at the time of the measurements? I am going to start trouble shooting this live today. I am measuring all this in my neighborhood street, it is level enough that...
  4. pbreisch

    The ABCs of AHC - How to Measure, Flush, and Adjust all in one place

    started to get a rough ride today and ran tech stream, came up with these numbers: Front Pressure - 7.5 Rear Pressure - 10.3 Accumulator Pressure - 10.4 Looks like the rear is way out of spec. Current mileage is around 170k I do have a Dissent rear bumper and swing out but I have King springs...
  5. pbreisch

    Events/Trails 10th Annual 100s in the Hills! *Silverton, Colorado July 22 - 27 2020*

    Thanks for the transparency about the event. We know you guys are doing all you can to do what's right for the participants and the town.
  6. pbreisch

    2020 Grom VLine Tech

    Have you disconnected your phone from your factory handsfree calling? Not just in the phone but in the factory head unit as well? That solved all my issues with hands free calling and "hey Siri" commands.
  7. pbreisch

    2020 Grom VLine Tech

    Finally installed mine today. Followed most peoples lead and put it in the glove box. Ran the GPS up to the passenger side dash by the auto head lamp sensor (I think that's what that little red button is) and the Mic up the passenger side A-Pillar over to the mirror. I was initially having...
  8. pbreisch

    Events/Trails 10th Annual 100s in the Hills! *Silverton, Colorado July 22 - 27 2020*

    @geanes I was bummed for you (and the HIH community) when you initially posted that you couldn't get a slot, but super thrilled you got in. You've been incredibly generous with your knowledge of the area. And besides just sharing information, every year I've attended (and I'm sure years...
  9. pbreisch

    Events/Trails 10th Annual 100s in the Hills! *Silverton, Colorado July 22 - 27 2020*

    @Ouray19 Yep! see ya at the family camp!
  10. pbreisch

    Events/Trails 10th Annual 100s in the Hills! *Silverton, Colorado July 22 - 27 2020*

    Missed you and your family last year, are you in this year?
  11. pbreisch

    Events/Trails 10th Annual 100s in the Hills! *Silverton, Colorado July 22 - 27 2020*

    In! wow. fast fingers!
  12. pbreisch

    Events/Trails 10th Annual 100s in the Hills! *Silverton, Colorado July 22 - 27 2020*

    Can't wait!
  13. pbreisch

    Grom Vline Group Buy Round 2

    I just PM'd you to get in on this! Thanks! EDIT: Order placed. Thanks for organizing this!
  14. pbreisch

    Events/Trails 9th Annual 100s in the Hills *SILVERTON COLORADO* July 24-29 2019

    In Colorado Springs for the night. Heading to Salida via Leadville (gotta get my mile high pizza fix) and the aspen ridge tomorrow morning. Camping near Salida tomorrow night. Marshal Pass Tuesday, it’s sounds like there might be a group heading out that day?
  15. pbreisch

    Events/Trails 9th Annual 100s in the Hills *SILVERTON COLORADO* July 24-29 2019

    Heading out from Detroit today!
  16. pbreisch

    Metal-Tech 2019 GROUP BUY for Bumpers and Sliders!

    Installed! I had mine powder coated evo grey to match the trim and bumpers. My install tip is to use some plastic spacers to set the gap between the body and slider. Keeps it consistent front to back and left to right. I had some left over from a pergo floor install. Foreman inspecting the job:
  17. pbreisch

    2006 Black LC baseline and build

    Metal tech sliders installed. Powder coated evo grey to match the trim and bumper. I used some plastic spacers that I had left over from a pergo floor install to set the gap between the slider and the body. Foreman inspecting the job:
  18. pbreisch

    Metal-Tech 2019 GROUP BUY for Bumpers and Sliders!

    Thanks for the shipping info! Order placed.
  19. pbreisch

    Metal-Tech 2019 GROUP BUY for Bumpers and Sliders!

    @helocat Can I get shipping cost to 48067? Raw sliders please.
  20. pbreisch

    A Cool New Product from LCP for the 100 guys

    Just placed an order for the covers and a jack adapter!
Back
Top Bottom