Has anyone created a mechanism to easily remove the side pop out windows? I'd love to do a full roof chop down the road but I'd like to see what it's like with as much removed as possible before I break out the sawzall.
There's no reason to do the block off plates if you don't have stuck valves. Here's my experience and information I've gathered:
For those of you who own or are considering a 2005+ GX470 or later year 4th gen 4Runner with the revised V8, I would strongly suggest buying a $45 secondary air...
Took the fill bolt off on the transfer case, plenty of extremely clean oil so I don't think it's the o ring.
Is it possible my rear output shaft seal is bad? I'm assuming the oil splashes at higher speeds and that's the light misting I'm seeing at the top back of the transfer case and actuator.
Finally got up close and personal with my transfer case. While there's a light mist of oil on the transfer case and the back of the actuator near the rear drive shaft, the gasket between the actuator and transfer case appears to be bone dry. The oil mist is really concentrated near the top of...
Installed the Toytec 3" lift, dif drop and MetalTech spring conversion last January at 150k miles without issue, truck felt wonderful without the old tired shocks/springs/bags.
About 4 months and 2k miles ago I started to get some front and rear end thumps over bumps and a feeling in the...
Damn, that sucks about the tape, sorry about that. I wonder if those who did it before me are having the same problems.
To be fair to Monstaliner, I think the stain you're seeing is the 3M rubberized fender spray that the body shop used and not Monstaliner. The small spot of rust that was...
This is the flare off the driver side rear, above the tire, it's just upside down. The yellow clip in the top right is where it connects to the rear bumper.
@Dissent you have a GX in addition to your LX, right? I just saw your sig and panicked for a second as I thought I posted this in the...