I'm at the end of my rope. Mama's 2002 tacoma, 3.4 4x4 auto. Just hit 200k. Intermittently, only under throttle, the truck makes a noticeable moaning/groaning noise. Its not bogging, and I cannot recreate the noise in park, only while moving, again, under throttle. If I let off the throttle it...
Thanks jpoole, I will do that for sure. It's hard too see for sure with the dang plenum in the way. I really appreciate the advice and will report back with findings.
It's hard to get my phone at a low enough angle, but the seepage is coming from right under the coolant temp. sensor. I've been looking at head gasket pictures and wondering which holes oil goes through, maybe one is close to this location? Anyone know?
I'll get some pics tomorrow in the daylight. There's no oil on the side of the head itself so that makes me want to rule out valve cover gasket and plug tube seals. The dist. O-ring is good, the spot is pretty localized, but I will check again tomorrow just to make sure. Will inspect timing...
Hey guys. Stats up first. 1996 fzj80. 195,000 miles. I've searched and haven't found anything about my problem so here goes. I have a slow oil leak. It appears to be where the head meets the block, right under the engine coolant temp. sensor. This sensor is above the oil filter and just to the...
Mine slowly goes down over time. Can't find leaks I just try not to think about it. AHeM am waiting on blackstone labs to send me the sample bottle to get the oil checked out just in case.....oh God nooooooooo!
Sent from my SAMSUNG-SM-G530AZ
For the seven pin? I believe so. I put it back in and the problem is still there. I jumpered the plug for the cdl switch on the tcase and the lights showed on the dash so I ordered a new switch. Hopefully the switch is out-otherwise its prolly the actuator from what I've been reading and that...
Hey fellas. 96 fzj80 here w/ no lockers. Added the cdl button and it worked-cdl worked along with the cdl light and abs in high gear. Figured id go for broke so Then I did the seven pin. Used a dental tool and pulled out the black wire with the blue line on it. Now I aint got nothin- no lights...