OK,
Help cure my frustrations with the power steering pump on this 3FE (1991)!
I am no stranger to bleeding power steering systems, since most of my rigs have hydro assist, but this pump is fighting me!
This newly acquired 80 had a very cold nature power steering pump that was always loud until...
Ok, I have about the cleanest rust free 98 LX470 known to man, and I pulled the perfectly working AHC and swapped to OME. Every bolt and line came off with ease as clear by the pics. I have 4 globes and pumps. I have the torsion bars and springs. I have not removed the main pump yet or the...
I have a full set of 5 35x12.50R18 that have 700 miles of street driving. They are basically new and no defects etc. currently mounted on 5 sequoia/tundra steel spare wheels that have been painted off white expoxy appliance paint. 5x150 with lug nuts. $1250 firm for the set of 5. Located in...
OK, so let me go old school and actually do a little build thread.
Forewarning......Toyota purist can go ahead and keep your silliness to yourself :)
The past several rigs I have built (72 Commando, 91 YJ and 81 Scrambler) have all been built 1 tons, locked, geared, ample horse pony V8s etc...
Who is running 5.29s on 35s with a 4 speed? I'm really debating my best plan since this rig (98LX) will eventually get 1 tons. If I'm going into the diffs to put in ARBs, make sense to go ahead and regear, but the jump from stock 4.30 to 4.88 doesn't seem to be worth into me. Crawl control is...
OK, I'm looking for a set of 5 18" tundra steel wheels, the 18 hole design, not the 5 spoke design in VA or willing to ship. I'll be painting them, so color or surface rust isn't a big deal. Looking for 5!
OK, so i just picked up a new to me 98 lx470 to make a comfy trail rig out of. It is by far the cleanest rig I have seen as far as 100s goes, with a spotless frame with zero rust. That being said, I'm ditching the AHC, but it's so clean, and should be much easier to remove than most I've seen...
Hey, are there any 32 spline lunch box lockers available for the 100 series/470 rear 9.5” rear? Considering changing my build plans to a 100 series but don’t want to put much money into axles since they will he replaced later on after a spring wheeling season or so??? What day the peoples??
OK, Time to make the official call. I am looking for a clean 96-97 Toyota 80 in and around Richmond VA. Everything I've found is either super rusty, leaking oil from everywhere or clearly made out of solid gold! Not looking at LX450's since I have plans that want me to have the clean flares...
I know throwing a built Jeep Scrambler at a bunch of Toyota folks is always a tough sell, but thought I'd give it a try!
I have a 1981 Jeep Scrambler, TBI 350 V8 (new top end and 28k on the bottom end), NV 4500 with BUILT 1 ton axles with 5:38 Detroit front/Arb rear, all Powerstop 14" brakes...
I know throwing a built Jeep Scrambler at a bunch of Toyota folks is always a tough sell, but thought I'd give it a try!
I have a 1981 Jeep Scrambler, TBI 350 V8 (new top end and 28k on the bottom end), NV 4500 with BUILT 1 ton axles with 5:38 Detroit front/Arb rear, all Powerstop 14" brakes...
OK,
SO.... i'll preface this by saying I'm planning my next build...a family rock/wheeler to replace my 1 ton Scrambler. I'm intrigued by the Sequoia since it has a good frame and 4.7 and room for my 4 kids. I've seen a few SAS on instagram...but since I currently have a built set ion 1 tons...
Just throwing this out there knowing full well this a Toyota diehard crew, but I'm selling my Scrambler Rocker Crawler I took on the 2018 Ultimate Adventure. I doing a family build and will gladly consider any 80s, built or stock in trade or partial trades. As it sits on built 1 tons is 33k, and...
OK,
Although I really do not want to sell this rig, a few opportunities have come up, so I'll post it for sale and see what happens. This is a very well built rig that is plenty streetable and is a point and shoot rig! I'll get some better pics once the weather turns, but for now, there are...
I'm looking for a 5.3 or 6.0 powered 40…or even a fuel injected SBC 350 will do….just a fuel injected V8 40 series that I can't see through the holes in the body. I'm planing on a 1 ton swap, so axles aren't important….any any location will do. The plan is to make a driver,1 ton V8 cruiser..in...
Since most of you know the whereabouts of every cruiser around, thought I put out there I am looking for a 40 to build/ wheel. Looking to do a V8 and tons, so anything you all know that May be a candidate....please pass it on! The closer to Richmond the better...
Selling my father inlaws Cadillac. It's the XTS4 AWD Platinum edition that is fully loaded with 24391 miles. Graphite Grey over Black leather. Mechanicsville, VA $35500
2013 Cadillac XTS4 Platinum edition with 24391 miles. 3.6L V6 AWD 6-speed Automatic in Graphite Metallic with black leather...
I will consider partial trades for a FJ60/62 or an 80 so I can build something to fit my family. 15k/OBO or Trade + Cash.
1991 Jeep YJ, 4.0 Inline 6, TF999 Auto 3 Speed. It's an AC equipped Jeep that currently runs a soft top and 1/2 doors. This jeep was built at Independent4x in Ashland VA...