My mother in law just bought a new crv and wants to do rust protection and clear bra/film. She also wants to do bed liner on some 4runner running boards. Who are some good shops to get these done?
Thanks!
Anyone have the toyota adaptor for a motive power bleeder i could borrow? I didn't use one last time but I've lost a rubber gasket and chain for the standard motive cap.
Thanks!
I've been trying to get my rear diff lock working again. The plugs had ripped out. And it needed the internals cleaned. I spliced back in and was still non functional. I traced it to another bad plug. Replaced that and still non functional. I can get it to actuate directly from the battery...
I need to repair my rear locker. Both plugs are ripped off the actuator. I have the correct new housings but not the terminals splices. Is aftermarket ok? Toyota wants $10 bucks each. That's another $80.
Thanks
We took the kid to the belgrade Christmas convoy. Went to leave and the key wouldn't turn in the ignition. No amount of wiggling, lube, rocking or banging would work. Had it towed home.
Trying to eliminate some things,
80 owners: do you hear a click when pressing the brake to release the...
Anyone have a working ignition coil for a 95 land cruiser? We were on our way to the tobacco roots to backpack. Had to turn around from massive misfire, blinking check engine light. The coil is arcing badly. A new lead wire didn't help. No parts stores have a coil. Hoping to get it fixed...
Is any one here familiar with search and rescue insurance?
I bought a Garmin inreach last year, during setup I added SAR insurance for $25/year. It's time to renew.
Are the found and rescued billed for services? Gallatin or anywhere?
Is SAR insurance worth the cost?
Is it actually...
I'm starting a rear shock replacement and I am short the lower shock mount bushing. Any one have one on hand? I'm trying to get ready for a trip this weekend. Thanks!
I'm pulling trigger on a campteq pop top! Anyone with a campteq pop top near Bozeman Montana? Or maybe anyone passing through that I could get a hands on look? Thanks!
I have a 95fzj80. Front and rear bumpers, sliders, roof rack and drawers. Ive had the slinky stage 1, 75mm heavy lift for about 3 years. I ordered from red line. I wheel moderate trails. But the truck has never been air borne.
I've somehow managed to bend all four shafts on my icon...
95 fzj80 rear hatch won't latch. I replaced the latch with a new oem unit. The plastic piece on the old latch was missing, I assumed that was the problem.
Can the striker go bad? It's just a metal hoop, I have a hard time believing that's it. I've read about bent lower tailgates , could...
Hello fellow 80 series owners. I am in possession of the "wits end" bushing press tools thanks to @rc51kid. I'll have them for the next couple months. He has o.k.'d me to get them some use. I won't lend them out but if some club members are looking to do any bushing replacements I have...
I'm looking at a used Honda crv, it keeps shredding the serpentine belt and has overheated. I have the AutoZone block test to see if the head gasket was damaged, will it work if the coolant isn't being circulated due to no serpentine belt? Once up to temp will the thermostat open and flow any...
I have been pricing 3/8" synthetic winch line at southeast overland. Any one looking to upgrade and want to split a 600' foot spool? 150' @$300 each for 4 people including myself. I would make a 75' main line and two 30' extensions. I figure some footage goes into making the loops. Maybe...
So we have had some spectacular trail rides this summer, all thanks to the great gift of public lands. we are so lucky to have access and even luckier to have proximity. September 24th is national public lands day and I think we should give back. I think we have a strong club and have a...
I have an extra 95 fzj80 factory service manual and electrical service manual to lend as a general clubhouse resource. I also have some specialty tools if any one needs them. I have a 54mm nut socket, ball joint separator, bearing and race driver set(all needed for a front axle service on an...
95- 210k, Out of nowhere the rig started missing like crazy, rough and stumbling idle and acceleration. Also dumping unburnt fuel and clouds of white smoke out the exhaust. It threw a P0306, After some reading I determined I had a stuck injector. so I immediately started taking things apart...
95' tlc. 210k, swapped non locking axles for oem lockers. My first issue was using a 94' donor main sill harness. I wasn't getting the shift lock mechanism to release. That eneded up being a rotten connector where the ground spliced with two other grounds. Easy fix once we figured it out...
I am switching my wiring harness to gain connections for diff locks. the spare harness I have came from a rig with lockers. I am missing the connection for the "2nd and PWR" button. Can I delete the option or do I need to separate the old connection from the main loom and find the pin outs at...