The 400w is fine for charging batteries etc for my electronic devices. If I wanted to run power tools or a hair dryer then no. The reason I chose this one is its a True Sine Wave inverter not a Modified sine wave.. The latter can damage sensitive electronics.
Installed a home made wind faring on the front of the Gamiviti rack, first I flipped it over and used the Yakima A1 towers after some mods. Ordered a sheet of ABS plastic online and cut to shape, attached with zipties.. It came out pretty good and dramatically cut the wind noise, I can...
Ashtray cigerette lighter outlets usb
Modified a wallmart tripple outlet with usb and installed with the modified ashtray mounts.. best $8 upgrade yet! Took the thing apart, spray painted it black and used the angled braket mounts that I cut off the ashtray assy. Wired it to the existing...
The wrap is on the outside, that is why you want the laminated type so dirt doesnt get in the little holes.
Here is the link to my drawer system complete with plans.
https://forum.ih8mud.com/80-series-tech/209816-new-cargo-drawers-my-first-mod.html
I got the white as it reflects more heat, the black would attract the heat and not be as cool.. would look funny on a darker car though with the white.. The black would still reduce the heat but I bet the window itself would get really hot. The inside of the vinyl is actually black so when you...
I found the film at Fast Signs, it is a perforated vinyl laminated with another clear plastic. You can see right through it on the inside but very difficult to see into the back.. It block 90% of the light along with the factory tint. The fridge will run much cooler and more efficient using...
Window Wrap
Installed some window wrap on the rear window to help keep the fridge cooler, sun was beating in and the exterior of fridge was about 110. Also detailed the interior, it had been over two years.. smells good again..
Got mine in the mail yesterday and installed it today along with some new hoses.. Went in super easy and just used zip ties on both clamps, be careful as if you pull too hard it will crush the plastic canister. No more tank pressure!
I just got a Gamiviti expo rack, sweet setup and only weighs 50lbs. Look it up at Gamiviti.com
I plan on using it for surfboards stand up paddleboards and my rtt
The Bottle Relocation Kit came with stellar step by step instructions but the 2nd battery tray came with nothing but the hold down bar and the j bolts. I thought it would have come with the 5 bolts to mount the battery tray but it did not. I had to stop the install and pick some up the next...
I waited a few years longer then I wanted but now its done. The cost was not too bad, its the little things that nickel and dime ya but I would say I was approaching $400 all said and done.
Someone asked for more pictures of the inverter.. So here it is. Its the silver box under the outlets, pretty small and seems to be a little better quality then what you get from local stores.. Because of the Pure Sine Wave form you can safely power your electronics without annoying buzzes or...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.