Search results

Nothing to sophisticated - installed a yaesu ftm400xd ham radio and a short trip to the mountains.

@TRAIL TAILOR the paint you applied cleans up nicely! :bounce: And tough as nails with tree branches brushing both sides of the rig!:clap:

I used the existing factory holes where the rear cargo hooks are located.placed plywood in place, crawled underneath the rig and used a ink pen through the holes to mark the plywood . Purchased longer M6 bolts

http://www.solarscreen.com.au/ Custom window screens for the 60 series

Rear storage platform with rubber mat top bolted to the body with refrigerator and slide.

Corbeau Sport Vinyl Seats. Only had these for a couple months , very comfortable and easy to clean up. Only complaint it the head rests sit back to far.

OEM will be stamped with TOYODA. IMO I would not trust EBAY purchase of an aftermarket steering box. Google image search shows the exact same gear box shown on EBAY as well as other vendors- meaning the image is a stock image and probably not a true representative of the item for sell.

FJ80 Power steering box upgrade. Hat Tip to @TRAIL TAILOR for the Power steering box and guidance. Scheduled an alignment to dial in toe in / out.

Confirmed - Honda door lock rod clips are the fix for the DS tailgate release.

Ordered- thanks @WSOPgold2012

Just can seemed to locate it either for the 60 series. I’m seeing a lot of these clips for Toyota Land Cruiser but not the same . The only thing I found online that resembles the clip that will allow the rod to pass through was an assortment pack from AutoZone

The tailgate door lock rod clip snapped after 34 years. Very impressive the clip lasted 34 years with the tailgate opening and closing thousands of times . Did not see replacement clips at “clips and fasteners”website and did the usual search through the land cruiser supply websites however...

I will have to replace my leaky heater core in my 1988 FJ62. Did a web search , SOR has aftermarket heater cores for both the FJ60 and FJ62 ($134 each), however they have different part numbers. Also have seen where the search showed heater cores for model years 81-90 are the same part number ...

Replaced rear cargo carpet padding and started on the rear storage for the frig.

Excellent work @Spook50 !!! Refurbished DS window relay works like a charm. Saved me $$$ and is in better condition than factory. Fantastic turnaround time !

I have this one that did not work with the 4Runner. Slightly short but will have to do until I order a corrected size.

Installed a 270 degree awning, front sway bar bushing replacement and a run to Home Depot for plywood to build a simplistic rear storage for the Engel frig.

I sent my 60 series rig to @TRAIL TAILOR for a complete overhaul - 80 series suspension and LS3 swap along with other goodies. The experience and communication with J was fantastic. No complaints. I have had my local mechanic, a muffler specialists and 4 other onlookers gawking at the rig...

@TRAIL TAILOR roof rack.