HFT settled with Snapon, paying an undisclosed amount. Yes, it is an exact copy, this is why it is so good. I also own one and it is realy good. But that high quality is an exception not the rule with HFT tools.
I used to be a Craftsman guy to. Too bad Sears f.up that brand and mismanaged the...
If the rack seals are damaged tightening will do no good. You'll need to replace the seals. The seals are between the rack feet and the roof channel. Also check the bolts washers. They are covered in rubber.
we already have quite a few big and good posts about Tesla style units for LC.
I'm looking for info for LX units.
Based on this LC post
I found this unit ZwNav unit...
Do you mean the factory cameras? Do the rear camera guidelines still orient themselves when turning the steering wheel?
Does the front camera still has the split view and the guidelines for the side of the truck? Does is still coming on when you slowdown under certain speed?
Or is this...
With the critical bolts the only solutions short of recoating the bolts (not economical unless you work for a business that does that) is to periorically removed them, clean and reinstall. Some soaking in PB blaster also helps with cleaning. Although PB blaster is not a grease it is a good idea...
About the bolt torque....
Toyota has not published it.
Kaon KS0328/39 recovery point for Land Cruiser 200 series specs: 126Nm / 93ft.lbs.
ARB 2815020 recovery point for Land Cruiser 200 series install specs: 120Nm / 88ft.lbs.
I'm using Kaon specs.
You might be in luck. Some painting will be needed but maybe the truck will live. Nice color BTW.
Maybe if you send them pics - the rack that saved the truck, they will give you a big discount on a new rack.
... more fitting info for Security Chain Company ZT751 Super Z LT Light Truck and SUV Tire Traction Chain
UCA clearance at max steering angle (FR wheel, full lock to the left):
Spindle clearance for Y plate at cable joint - small:
Security Chain Company ZT751 Super Z LT Light Truck and SUV Tire Traction Chain
They come with the rubber tensioners. Spare tensioner is SZ1176. They are very similar to Super Z6 SZ451, but the overall built is stronger from cables to plates. Plates that join the cables are much stronger. The...
Chips might have nothing to do with the accident. It might be that bumper cover was removed at some point and mishandled/dropped. There is no other way you can chip that edge and not damage the metal panel's paint.
As bloc said it is up to you.