Search results

  1. graham5david

    What Did You Do with Your 80 This Weekend?

    Nice bee
  2. graham5david

    What Did You Do with Your 80 This Weekend?

    Got tired of my 4x4 labs bumpers getting rusty and repainting them so I had them powder coated. Now to install.
  3. graham5david

    For Sale fj40 gas tank straps

    Years ago. Now I need to buy another 40. The addiction is real.
  4. graham5david

    Spare fuel bladders in the doors?

    Once the fuel level in the tubing reaches the level of the tank the majority of the pressure will be equalized. At that point you are relying on the pressure created by the 1/4 gallon of fuel in the filler neck to supply enough pressure via gravity to fill these bags. Not to mention that this...
  5. graham5david

    New AC belt won't go on.

    It is a tight fit. Seems too tight but it will go.
  6. graham5david

    Help diagnose this engine noise please

    Hard to say. Is it different with AC on or off?
  7. graham5david

    HG Blown & Hydrolocked

    I would recommend painting your engine with por 15 engine enamel kit. Buy a few extra foam brushes. I was really impressed with it when I did mine. It comes in 2 tiny cans but it spreads far
  8. graham5david

    HG Blown & Hydrolocked

    That pretty much covers everything. you should be good to go unless you want to have the transmission and transfer case gone through.
  9. graham5david

    HG Blown & Hydrolocked

    Replace the fuel injectors and their connectors. I replaced the TVV and VSVs under the intake and all vaccuum lines because they are a hassle to get to. If you plan on deleting the EGR now is the time. I replaced my power steering pump and ac compressor too but probably didn't have to. Power...
  10. graham5david

    Wont crank, odd situation.

    If you have spark it should try to start unless you are missing fuel or compression
  11. graham5david

    Wont crank, odd situation.

    Keep plugging away. you will find it
  12. graham5david

    Wont crank, odd situation.

    Check the fuse for the ignition as well. its just below the rear heater fuse
  13. graham5david

    Wont crank, odd situation.

    I always ground my test light to my key in the ignition. any other metal spot works as well.
  14. graham5david

    Wont crank, odd situation.

    Need a light. Test both sides of the fuse. Power comes in one side and goes through the fuse to the other. With a good fuse you should have power to both sides. If it's bad then you will only have power on one side of the fuse. if no power to either side then you have to trace it down. My alarm...
  15. graham5david

    Wont crank, odd situation.

    I lost power to that fuse and wound up stranded. Had to jump power to it for a month until I figured it out. Was a combination of bad fusible link and old alarm. I had no power to this fuse. But this got me buy for a little bit
  16. graham5david

    Wont crank, odd situation.

    Inside
  17. graham5david

    Wont crank, odd situation.

    Check the fuse above the rear heater fuse with a test light. see if it has power.
  18. graham5david

    What are these 4 sensors for

    Knock sensor, a couple temp sensors and Thermal vacuum valve
  19. graham5david

    94 Died on freeway, no start, no spark

    Could be fusible link, old malfunctioning alarm, etc. Mine did something identical once and I found that I had no power to the ecu fuse. Just ran a jumper to it until my fusible link arrived. In the meantime I ripped out the alarm. Replaced the fusible link and then all was good. Are you sure...
  20. graham5david

    Spotted Silver vx 80 in Odessa Texas

    Spotted a very nice vx 80 in odessa today. is it anyone's on here? I didn't take a picture because that's how people get shot out here
Top Bottom