Search results

  • Users: cmck
  • Order by date
  1. cmck

    WDYD What have you done to your 100 Series this week?

    Yes, the Clearview mirrors are well built. The uppers connect to factory adjustable switches. The lower wide view mirror is really useful and they push closer to the body if needed offroad. They extend for towing and give you a view down the trailer side.
  2. cmck

    Transmission help-real time

    I also think the tcase replacement comment is a sign the shop is not knowledgeable about this driveline. I can’t speak for the transmission situation.
  3. cmck

    RTH Torsion Bar and droop

    It took me 3 times to get mine matched. :D
  4. cmck

    Cannot remove Tough Dog Rear Shock 45mm (Passenger side)

    I agree on ratchet spanner and I took out the spare and reached up over the axle. Some folks have drilled a socket sized hole from the top and then put in a cap. I have a full storage platform so that’s not for me.
  5. cmck

    Shortest Cargo drawer system that yields tallest clearance

    Mine are 13” on a 1/2” sub base. The drawer depth then allows 11.5” contents which is handy. I have the rear ac which takes some ceiling height up front.
  6. cmck

    UZJ100 us spec transfer case re-gear... Has anyone done this?

    I don’t want to go back to stock......ever. :D
  7. cmck

    Arches National Park

    Consider hiring a professional guide like Dan Mick’s to guide you thru some trails. This builds in a safety factor of both, picking a trail with the right conditions that day and gives you two trucks and a experienced spotter. I used this approach in 2016 and it was money well spent. The...
  8. cmck

    285/75r16 + snowchains

    99LC no ACH, I have RUD snow chains and have run them in the rear (low speeds/offroad) and in the front with spidertrax 1.25 spacers.
  9. cmck

    UZJ100 us spec transfer case re-gear... Has anyone done this?

    I rate this as a :banana::banana::banana:Or a :banana::banana::banana::banana: I did it all myself with parts from cruiser outfitters (sumo brand gears). I used a friends press, a friends lift and kept the rig running by buying a used case to modify. Then in the end did a swap. Had I not gotten...
  10. cmck

    100 series lunchbox locker

    Tell us more about your build plans in total. You, say you want to replace axles that implies heavy wheeling and more hp.
  11. cmck

    To tap or helicoil? rear sway bar mount stripped

    It’s all about meat no matter what you reducing metal. The helicoil in theory is putting some back in. What actual bolt and location “photos” ? And what the bolt size? Should be a 12mm socket, I’m guessing it’s an 8mm.
  12. cmck

    WDYD What have you done to your 100 Series this week?

    If you don’t film it “It didn’t happen”!
  13. cmck

    UZJ100 us spec transfer case re-gear... Has anyone done this?

    Not I. I didn’t really consider it.
  14. cmck

    UZJ100 us spec transfer case re-gear... Has anyone done this?

    I looked at this Otramm video many times then dove in. This is only part 1 there are two. It is 80 series but the case part is really the same. It also helps to see the various gear pulls and sequence although it does not cover underdrive and there are some differences in between the 100 and...
  15. cmck

    UZJ100 us spec transfer case re-gear... Has anyone done this?

    Yes, on the bench is the way to do this. It’s not that hard to drop and lift it back in.
  16. cmck

    Mystery part, what the heck is it....and where did it come from?

    This: It olds in the false pedal thing by gripping the threads of a mounted stud.
  17. cmck

    UZJ100 us spec transfer case re-gear... Has anyone done this?

    Was it easy? no. Was it hard? no. I broke a bolt, I didn’t clearance the case “enough” till final assembly, the bearing on the idler shaft had so little clearance I could not pull it, I just got another one. Would I do it again? yes. What I did that made it easier (not cheaper) I bought a...
  18. cmck

    UZJ100 us spec transfer case re-gear... Has anyone done this?

    It’s been installed since ~June 2019, it’s awesome. I have used the low range over 3 days of wheeling mostly blues on 35’s at Rausch Creek Offroad Park. We then took off for 3 weeks in Nova Scotia and NewFoundland and about 6000 miles where the underdrive proven on 33’s. I have had zero...
  19. cmck

    Important: do y'all wave to each other?

    100 series guy: I wave and older series folks tend to wave back. Anybody with a built rig waves, stares or follows you for a good look. 😎
  20. cmck

    Builds 'Ele'Ele Build

    I need to be closer to your cruiser guy. I need the old window “mod” and the heater core “mod”.
Top Bottom