Search results

  1. Stuckonanisland

    Axle bolts sheared off? Why?

    I know, Im just trying to nickel and dime since I have to pay for the service now. Speaking of a hub rebuild, how does everyone feel about Terrain Tamers rebuild kits? They seem to be the only thing readily available to me right now.
  2. Stuckonanisland

    Axle bolts sheared off? Why?

    Ok crazy question. I get this may be a home garage fix for many, but I have to take the truck to a shop. All my tools are packed away and they’re too expensive here to go buy a second set that’s adequate to do this project (the brake drum is rusted through too, but I have no pliers or brake...
  3. Stuckonanisland

    Axle bolts sheared off? Why?

    Yes. I had not seen this problem before and wanted to make sure everything was reusable before I bolted it all back together. That’s when the cable locker issue came up. But I am reusing the axle and hopefully the hub if I can extract the studs with no problems.
  4. Stuckonanisland

    Axle bolts sheared off? Why?

    The splines on my axle seem to be much longer than the ones posted earlier. Here on mine they measure to 105 mm. Thanks for the input all. I’ll post here as I continue working.
  5. Stuckonanisland

    Axle bolts sheared off? Why?

    (Edit: I have included the part number pages for the rear diff and axle. You can see there is a differentiation between cable locked and non cable locked diff, but none is made for the axle shaft itself. Unless any concrete evidence of something else, I am going to get the axle shaft listed and...
  6. Stuckonanisland

    Axle bolts sheared off? Why?

    It seems to be false. The shaft part number for full float and semi float axles are the same (42311) as per Toyota parts diagrams.
  7. Stuckonanisland

    Axle bolts sheared off? Why?

    I read in one of the linked threads that cable locked trucks have a different axle shaft than regular trucks? Happen to know anything about that? I just find the shafts have all versions of trucks from 40, 60, 70, 80s listed as fitting. It seems like a one off comment compared to other info.
  8. Stuckonanisland

    Axle bolts sheared off? Why?

    Funny enough the dowel is the only piece I recovered on site. Thought I’d see how they broke to solve it but I guess they were explosive and the dowel just rattled down the street a bit. Thanks for the advice on going Toyota factory.
  9. Stuckonanisland

    Axle bolts sheared off? Why?

    Awesome. I’ll try that search term. Thanks.
  10. Stuckonanisland

    Axle bolts sheared off? Why?

    This was supposed to be a successful first off-road trip thread. Clearly it is not. Pics included. My inner axle popped out. Felt a slight “thwunk” and then lost power to the wheels Felt like the clutch slipped out of gear. No. I jumped out and the rear axle was sticking a full foot out of...
  11. Stuckonanisland

    24V keyless entry

    I don't think there is a specific 24v receiver. Im getting the same thing done on my HJ61 and the shop is using a 24-12v reducer to be compatible. same with an aftermarket radio and GPS tracker. It seems easier to use a dedicated reducer for each rather than 24v dedicated parts, which are either...
  12. Stuckonanisland

    Bowfin Cruisers Roof Rack for the 60 Series

    This roof rack wouldn't by any chance fit the high roof to fit my HJ61? I think I know the answer but that rack looks too quality not to ask anyway.
  13. Stuckonanisland

    Dimmer switch / Rheostat repair - cheap

    Just to throw a wrench in the mix....what about voltage? Is the rheostat voltage specific? I don't have one but the dash is so dim it's tough to see at night so I need to pop one back in. Where are they usually located on RHD cruisers, to the left or right of the steering wheel (I have...
  14. Stuckonanisland

    Hj61 POWER window replacement. I need a power window guru.

    Ok I'm at a loss. There are many many window and regulator replacement threads on here, but they're all for crank windows. I can find nothing for 60 series power windows. I can't even find a part number for the power regulator for a 60 series. I have power windows and they're all in need of...
  15. Stuckonanisland

    I did the wiper mod and 4 seasons heater motor

    Dude that is awesome thank you. I couldn't find the brushes anywhere except one place which was selling them for $99, which for that price is the reason I bought the 4seasons replacement. My 'inspiration' for refurbishing it was a single YouTube video I could find with a kiwi guy that had a...
  16. Stuckonanisland

    I did the wiper mod and 4 seasons heater motor

    Correct on both counts. Shipping anything to or from here usually costs more than the items purchase price. Plus it is indeed the 24v.
  17. Stuckonanisland

    I did the wiper mod and 4 seasons heater motor

    I'm assuming you're in the US. Shipping would be astronomical but when I come back and import my truck maybe I'll be able to help out. I'm not throwing away anything when I remove/replace, just in case someone like yourself learns how to resurrect old junk to new treasure. Hopefully by then...
  18. Stuckonanisland

    I did the wiper mod and 4 seasons heater motor

    Sorry but for what? Does he refurbish them?
  19. Stuckonanisland

    I did the wiper mod and 4 seasons heater motor

    After a hellacious monsoon drive while picking up the truck, I realized 1987 tech was outdated as far as visibility and safety went. I had to upgrade the wipers to put modern ones in. Thanks to this site for the tips. What I did was the same as everyone else, 2x 3rd gen 4 runner/surf Driver...
  20. Stuckonanisland

    Shackle height Q

    Thanks for the instruction on inversion shackles. -I am not sure how you are requesting quotes for the parts you need. The link I sent just has an add to cart button on it.- I'm in NZ and am talking about the NZ site. You have to request a quote for items, then they send you an email with a...
Top Bottom