Free H42 4 speed transmission with approx 250k miles. Had quite a bit of gear and/or bearing whine but worked fine when used last. Easy to shift/no grinding. Longer style with the spacer.
Pick up in Memphis, TN.
Does anyone know of a competent shop in the College Park, MD / Silver Spring, MD area? Suddenly having trouble with my FJ62 with an h55f swap. Very difficult to get into gear when stopped and the engine running.
Over the last month, it has been increasingly difficult to shift my h55F into 1st/2nd when stopped and has gotten to the point now where I almost cannot shift into gears if I'm not at least rolling a little bit. For a while only 1st was hard to get into, now 2nd is as well. If i'm moving, I...
Not to hijack, but my h55f has started to become very difficult to shift into first from neutral unless going to second gear and then first gear. Worse when warm. Any idea why? Was following this thread since the OP has a similar issue.
I recently came across a few forum posts which indicated that 1HZ engines from 105 series models had weaker internals than the same engine found in other models--perhaps 70 and 80 series trucks. Can anyone elaborate on these differences, if they are in fact true?
Read countless threads in which the fuel economy of different Toyota diesel engines was discussed. What would be the most fuel efficient land cruiser diesel engine regardless of cost, parts availability, power, and other such considerations for a 60 series wagon? Options include 3B...
I adjusted the valves. There was a moderate amount of carbon build up in the valve train but about what is normal for a an original 3FE with several prior owners and no service history. I think its gotten cleaner gradually with more frequent oil changes.
I removed the injectors and had them...
Would like some help diagnosing or at least theorizing possible causes for an engine stumble / patch of rough running which lasts from 1800-2200 (approximately) rpms only in 3rd gear. This issue has been going on for several years.
I have an H55f transmission and the original 3FE...
Apologies in advance. I searched but could not find a clear answer. When rebuilding or resealing a transfer case, is it recommended or required to coat the output shaft bearings and the idler shaft bearings in grease?
I had to rush through my t case reseal. it had been about 8 years since I did...