Search results

  1. Ackcruisers

    1976 FJ40 Charcoal Canister Hard Line Routing To Fuel Separator Check Valve?

    Those are really nice clips. Thanks for the generous offer. I am working on my next order from VintageTEQ.…I think what is throwing me off is how the two 90 degree angles on the clip fit onto frame or body... Also one of the angles is tapered.
  2. Ackcruisers

    1976 FJ40 Charcoal Canister Hard Line Routing To Fuel Separator Check Valve?

    Thanks @ToyotaMatt. Those are interesting clips. It would be helpful to how they are used. Any chance you have a photo of them on a FJ40/43/45?
  3. Ackcruisers

    1976 FJ40 Charcoal Canister Hard Line Routing To Fuel Separator Check Valve?

    Got it. My truck no longer has any of the welded pliable metal brackets on the rocker. There are so many on firewall and under the cowl to hold harness. Does anyone know where to source these? They all appear to have a rubber coating on them as shown below on my pedal bucket.
  4. Ackcruisers

    1976 FJ40 Charcoal Canister Hard Line Routing To Fuel Separator Check Valve?

    What a great tech write up @MoCoNative. This makes sense to me now. While the bends in mine will not be factory, I will be using a copper wire to finesse the pattern to get close. It’s a lot easier to bend than the 5/16 stainless steel lines.
  5. Ackcruisers

    1976 FJ40 Charcoal Canister Hard Line Routing To Fuel Separator Check Valve?

    That would be very helpful. I have everything ready to go. Measuring the hard line would be a bonus.
  6. Ackcruisers

    1976 FJ40 Charcoal Canister Hard Line Routing To Fuel Separator Check Valve?

    Thank you. Yes. I think it's the same. The cannister is mounted on passenger side inside wheel well. The bracket on my 76 is different than your 1/78. It appears the line runs along the inside of the inner rocker panel then crosses over (to the inside) to slide through grommet and then up the...
  7. Ackcruisers

    1976 FJ40 Charcoal Canister Hard Line Routing To Fuel Separator Check Valve?

    Can someone post up an image of how they routed the charcoal canister to fuel separator check valve hard line on a 1976 or 1977 FJ40? I’m making the lines and am not sure if the line is attached to the outside frame or to the body. The hardline is circled below in red. The other image arrow...
Top Bottom